2. speakers
  3. 1341295573

XTC Room Analyzer

With regard to the XTC analyzer, what is the difference between this, and putting two unidirectional mics (my Sure SM58s?) pointed at each speaker, feeding this through some DAC into two digital tracks on my computer, and doing an FFT in Matlab to look for frequencies with obvious accentuation? Am I understanding XTC correctly? What more is there to it?

Thanks.
Jim
river251

Showing 4 responses by kr4

kr4's avatar
kr4
3,649 posts
 
XTZ. It uses sweep tones, can handle multiple measurement sites, has the math automated, generates time-decay as well as FR and can synthesize corrective filters. Nothing that a sophisticated Matlab user cannot do, of course, but faster and easier.

BTW, are your SM58s calibrated?

Kal
kr4's avatar
kr4
3,649 posts
 
1. You should look at the XTZ site (and/or my review in Stereophile) to see the differences between the models.

2. Yes, if you are going to do any FR measuring with a microphone, it should be calibrated. I believe you can have it done for less than $100@. However, I do not believe that it is worth doing for the SM58 as they are basically not suited to this application (above the bass).
kr4's avatar
kr4
3,649 posts
 
Congratulations. Buy yourself a present.
kr4's avatar
kr4
3,649 posts
 
I have reported on the use of XTZ filter curves with the Classe and Rotel processors.

Kal
More to discover