Which is the better investment?


I have a Goldring GR-1.2 that has a tonearm that is supposedly a Rega clone. When I received it I noticed that the headshell was not perfectly level, it appeared to be bent down. I thought I would attempt to correct this issue and in doing so, came to two realizations: 1. the tonearm was attached by three wood screws screwed into the plinth (nothing like Rega). and 2. The headshell doesn't bend, it breaks.

Here is my question: It will cost ~$250 for a real RB250 to get the Goldring back up and running. Luckily there is a fellow on eBay selling them with the stainless base of the RB300 at $249 (new, no less). My other option is a chance at a steal on a Technics 1200. Someone here in my town has one with all original packaging and everything for $220 on Craigslist.

Which one would give me the bigger bang for my buck?
128x128hyperreal

Showing 1 response by mechans

The 1200 if it is in good shape.
A few caveats.
Don't forget that there are a ton of 1200s. All save a few are used by DJs who abuse the living ----- out of them. What beside form fitted foam a correct box and user manual does "the original packing and everything" mean. I doubt it is secret code language for NOS and unused.
I am curious why you think a table would be broken to bits and stuffed into a bag. Unless, of course, the ad stated for parts or repair etc. only. Even my worst ebay buy came all assembled in one piece with a box and everything, however, some worked for only 4 album sides.
Do you know if it has a a decent cartridge. Even if it did the prior owner would have to have audiophilia.Of course you can salvage the Goldring, which are in the for the money category MM. I own an MMF-5 it came with a better Goldring cart than todays version and I have yet to hear anyone rave about them. Otherwise it will likely be a worn DJ style scratcher and not usable.
The Goldring might be a Rega lite or decontented? Did you get to play it at all? If so you will be able to judge it on it's merits. If it sounds like a Rega you will be in with a slew of Rega fans who find it to be a tremendous table for the money . Always add the money bit.
If you get heavily into the incalcuble numbers of tweaks by starting off with a "better" but not stock arm, you are heading downhill diving face first on that slippery and expensive audiophool slope.
If you play alot of vinyl then, if you can, ante up the bucks and buy a better table. At least a modded by KAB 1200. You do get what you pay for when on the lowest end of the expense curve.