Which inexpensive ic's cables worth checking out?

The new Antipodes company out of New Zealand has a unique line of interconnects. I recently bought a pair of their entry-level Katipo and although these have an unusually long break-in (300 hours), their claim of sounding better than most interconnects costing up to $1000.00/pr. is not exaggerated. These are extremely well-balanced, revealing, and above all very musical. I'm so impressed that I'm buying more to add to my system. One of the great bargains in interconnects.

http://antipodesaudio.com/

Morrow, DH Labs, Speltz, & Harmonic Technology

Good cable's? how large is the signal traveling through cable? is this any better then that? assuming a couple things that your source is up to the task,a recording you like,experimenting is exciting the sound from a $12 pair of supra spea. cables just blew me away. my wrong thinking about expensive cables had to be corrected that and ran out of money.some great DIY recipes good luck

After a year auditioning different ICs, the least expensive Zu Varial won. I'm using 2 XLR ICs with SR Apex spkr cable and have no desire to change.

Heard good thing about the Paul Speltz products. I like how he turns his middle finger outward to the wire charlatans. I have gone into stores to listen to speakers and heard nothing but 90 minute sales pitches for high profit margin wires.

I would think that true blind testing would yield no difference unless you had the hearing of a basset hound.

There are many good ones in the price range, in my opinion. My 2 cents is that I plan to switch my entire system to the new MM2 version of Transparent Audio's Musiclink cables. The basic model is $85 per meter and the step up is $175, brand new.

To my ears they sound remarkably neutral and balanced.

Overall I think good speaker placement does more for sound than cables, anyway.

HI Mekong56: I have used both the MAC HC & the Burley. They are very different animals in my experience. It seems like the HC has a distinct "personality," and I happened to like it... after comparing it to many other PCs. Some don't like the HC, but I am not sure if they gave the PC a chance to "stabilize." I believe that the HC takes a *tremendously* long time to burn-in until one can really hear and rely on it. At minimum - 300 hours! Then the HC becomes very stable, it opens up and is predictable. The Burley on the other hand impressed me right from the start. My Burleys have benefitted from long play hours as well, but the Burley PC seems more stable from the beginning. I use Burley PC cords in two systems for power amps. Knowing that cords, like anything else, can be system particular and system dependent, I chose these after listening to others. The power amps that I use the Burleys with are all SMc Ultra Level Upgrades, McCormack DNA 0.5. I have mono blocks in one system and a single in a smaller system. Here's what I notice regarding the Burley in my rigs: a sense of relaxed authority, very very quiet, black, deep soundstage, no glare, no edge, smooth, etc. I could go on, because I really like these cables, but I will spare everyone, and I will quit with the superlatives. I use Furutech connectors with Burleys, which is an upgrade. Even smoother with more smooth sparkle. I find that the Burleys have both great top-end, as well as superb bottom-end extension. They do not struggle to keep up and reveal a lot of the information that is inherent in the music. These are only my personal experiences, and I am not affiliated with MAC other than being a very happy customer and a fan of the product. I do have other products in my systems as well.

These are pretty good. Here is a slightly dated review.

http://www.soundstage.com/revequip/alphacore_goertz_tq2_mi2.htm

You will find none Better than Audio art I/C.,
great performance to price ratio;

regards:

I use Chord interconnects with my Rega cd player and my Unico hybrid secondo integrated amp. They cost 90 dollars.

For grins, I auditioned a Kimber costing many times that. It had been used for 4 months.

Of myself and three other people, none of us could tell the difference.

Bside123-
I'd like to hear about your experience with the MAC Burly power cord. I was thinking of trying one. I have tried the HC, but it just didn't work in my system, and I am really curious about the Burly.

Mapman, I second the DNM cables, they are the best Ive heard in my system.

I would also like to throw my hat into the ring for My Audio Cables MAC cables. I have had a great experience with them throughout. Personally, I believe that they compete head-on with cables at just about any price. I have tested them against a vast variety of other cables. I use MAC Mystic ICs, MAC Burley Power Cords, MAC CuQ speaker wire. Steve Hallick has made spec custom wires for my personal and particular applications as well. I have chosen MAC, after extensive listening, and have picked them over much higher priced and higher profile cables. I also fully appreciate that personal taste and system synergy has a lot to do with which cables are "worth checking out."

DNM Reson - minimalist design, very "British" sounding: tight controlled and non-fatiguing
HArmonic TEch Truth Link - very neutral and clean
MIT Terminator - very good bass, extension and dynamics overall, very clean and just a touch more detailed on top when that is wanted

MAC Palladiums are outstanding at under $200.00. Steve at MAC often auctions them at $179. I was quite surprised how good they are. He is also great to deal with.

I've had good luck with Bogdan Audio Goldys here on auction on A'Gon. Also they're PC's.

Boss302

Yet ANOTHER candidate for the Chris De Burgh torture hour...sponsored by Audiofeil. Please proceed, down to the end of the hall...then take a right. Be mindful you dont go left...or Dylan room will knock you out for months.

"Signal Cable"

Buff sells MIT and did not disclose his financial interest.

Again.

His recommendation is invalid for that reason.

Supra EFF-1s.
Proof that no one has bettered what Bell Labs did all those many years ago.

Morrow audio MA1. Can be won on an auction here on audiogon for around $50.00 with a 60 day return and a trade up program if you desire.

Give them a shot. They may sound great in your system.

I also have had great success with the MAC Ultra Silver Plus RCA Cables.The Black Mountain cables are also good and their XLR(balanced) cables are a great value.While they are not inexpensive,The Granite Audio IC cables are the best I have heard and a good value because of the outstanding performance.Tom at Hudson Audio makes some terrific sounding cables as well.

MIT AVT-1, 2 or 3 interconnect.

I like My Audio Cables (MAC) for interconnects and power cords. Signal Cables didn't work for me. Personal favorite is Virtual Dynamics

Off you go to monoprice. There stuff is valued priced and does sound great.

I don't think you can beat Kimber Hero for the money. They come up quite frequently hereo on Audiogon.

Second Audio Art... smooth, detils aren't omitted, for the $$$? Super.

also Goertz Micro Pearl, but shielding is almost non existant, quite straight forward sound without edgyness or stridency. Nice. Formerly Stereophile recomended component. I got a pair and they're quite nice.

AA & GMP are very different sounding cables, BTW. Both should be in your budget.

Audio Art Cables.

I'd check out the Antipodes Audio Katipo - they're being auctioned off at a good price on a weekly basis. I'm liking what I'm hearing a lot with this cable in place, and I think it's my new high value leader in a crowded field. The usual disclaimers apply.

-Richard

As you specified balanced, look at Audioquest King Cobra or the less expensive Viper. I'm using the Viper now and enjoy them. As a reference I have used DNM Reson, MIT EXP pro, DH Labs and others. If you buy used of course you can resell with little risk.

All good suggestions. Cannot believe Signal Cables not mentioned.

Inexpensive means under $200, could include used which will bring more choices.

Mogami and Grover Huffman come to mind.

Paul Speltz's anti cables are inexpensive and have a major grin factor, they are that good!

My system is listed here on gon.
I prefer to use balanced cables.

What equipment are you using?This makes a big difference a lot of the time.

DH Labs BL-1 Series 2
Blue Jeans Cables LC-1

I'll second MAC at most price points, but burn them in or you'll never hear what they can do. Steve says he's burning them now: he's great to deal with: call him and double check. Also, BEL, "The Wire", if you can still get it. Brown recently died and he was a bit difficult to deal with, so stocks may be quite low. I've still got a bunch of the ic's: they replaced Transparent Ultras, Purist Colossus and Siltechs, fabulous for the price, a bit grainer than the MACs. HP used them for a long time in one of the Abs. Sound reference systems.

If you're up to making your own, Chris at VH Audio can sell you the components and you can make a world beater IC for the price, but you'll probably screw up one or two before you get the hang of do it yourself cables.

Frank at Signal cables is also great to deal with and sells no bs, good quality cables that, to me at least, are a bit more system dependent than the BEL's.

I used the BEL for years in many different sysems configs and they worked quite well in all of them. The MAC stuff sounds better in my current system, but I have little time with it with various different gear.

what's "inexpensive" in your terms?

MAC My Audio Cables, great price great sound. You can get a good deal here, he auctions the cables often.

Speltz Anti-Cable IC. Buy them and keep them through out other system component changes.