What small center will sound good with Maggie MMGs


I need a small center (7"x17"x10" HWD maximum) to go above my TV in a small cabinet that will match well with Magnepan MMG front speakers. None of the Maggie centers will work in my situation.
128x128fishcall

Showing 3 responses by albertporter

Fishcall, here are the specs on the Vandy, copied and pasted from their website.

CROSSOVER:
3500Hz. First-order, 6dB per octave.

* PHASE:
The woofer and tweeter are both in positive phase.

* IMPEDANCE:
8 ohms nominal.
5 ohms minimum.

* EFFICIENCY:
86dB at 1 meter with a 2.83 volt input.

* RESPONSE:
80Hz to 21kHz  +/- 3dB
Proximity compensation off.
The bass of the VCC-1 is bandpass limited.

* AMPLIFICATION:
30 to 200 watts per channel into 8 ohms.
High current is not required.

* INPUT:
Heavy-duty terminal block.

* SIZE:
12 1/8" wide, 9 1/4" high, 10 1/8" deep.

* WEIGHT:
23 pounds net, 27 pounds gross.
I have not tried the speakers Fishcall suggested, but it sounds like a good idea.

I'm running the Vandersteen VCC-1 which is a phase coherent two way, where the tweeter is mounted in a coax configuration. It disappears between my Soundlabs, creating more fill than would seem possible and has enough dispersion sitting atop my big screen Pioneer RPTV to be believable height and placement for the material routed to the dialogue channel.

I've found the amp is about as important to matching across the front three speakers as the speakers themselves. Since my main speakers are tube powered, I use a tube mono block for the Vandy dialogue.

The fact that this works for Soundlabs makes me think it might be good with Maggies. If you can, borrow a VCC-1 from your local dealer for a demo. It's definitely worth giving a listen.
Well, the Vandy was there on width and depth, sounds great and reasonably priced. I was hoping the 9 1/4" high (Vandy) would fit where you allocated 7".

Perhaps the suggestion by Timothyjk for the Aura? I found this "RCA" speaker at EBAy that has the Linaeum tweeter. Could this be the same speaker? Current bid is $61.00 with two days left.

You would have to contact the seller to see about dimensions as they are not listed in the ad.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3082337105&category=14992