2. tech-talk
  3. 1089762409

What's the frequency Kenneth?

Hi,

I need some help, if possible. After moving and months of looking for a place to live and waiting for a stand to set my gear up, I finally got my system put back together. Thor electronics, Accuphase CD player and Tannoy speakers. Boy did it sound sweet! While I was checking the bias on my amps, with no music playing, I heard something faint and low coming from the speakers. After putting my ear close, I could tell it was a radio station. WHAT???!!! So low, it was almost undiscernable, but still there. Not obvious at all during music playing, but still there. Now, if I wasn't an obsessive, compulsive neurotic ( Wait - What was that noise?) about my gear, this would not bother me. But it does. I'd like to fix it, if possible, but have no idea where to start. Any suggestions? Thanks for your help.

Dave
dfrigovt
11 responses Add your response
plato
1,543 posts
 
Well, if you're not using shielded interconnects, maybe you should try that, or go to RadioShack and get some RFI filters to install on the interconnects and power cords. Anyway, that's where I'd start. The longer the cable run, the more likely it could be acting as an antenna.

The tube gear may be more prone to picking up RFI than your solid-state components.
lugnut
1,190 posts
 
Dave,

The thread title brought a smile to my face remembering how Dan Rather was pummeled while being asked, "Kenneth, what is the frequency?" Thanks for the memories.
jwaugh
103 posts
 
You might try shielded interconnects as suggested and check ground/power. Most likely it is a lack of shielding for RFI on the ICs (at least that is what I had seen before)...
wellfed's avatar
wellfed
690 posts
 
My brother had the same experience, only worse. He traced it his satelite TV decoder. His solution was to plug the satelite decoder into a Monster power strip instead of the basic strip he was using.
david99
1,467 posts
 
Lugnut- R.E.M. wrote a song with that title after the incident with Dan Rather.
david99
1,467 posts
 
P.S. didnt 'they' come to the conclussion,the frequency was just in Dans head??
reubent
6,935 posts
 
This tread prompted me to do a Google search on "Dan Rather What's the Frequency Kenneth". I was always curious about the origin on the question. Well, believe it or not, here's an incredible explaination!!!!!

http://www.ape-o-naut.org/innuendo/

Check it out!

Enjoy,

TIC
Ag insider logo xs@2x
ncarv
983 posts
 
Thanks, TIC!
I recall that, after years of Dan Rather being ridiculed, the story had been validated by the arrest of the perpetrator, but I never knew the whole story of this obviously psychotic individual, and I did not know he had murdered someone.
So, no, David, Dan was on solid ground this time, unlike the time he walked off the set live during a CBS News evening broadcast.
dfrigovt OP
38 posts
 
Thanks for the help, guys. I'll give the suggestions a try.

Dave
rayd
81 posts
 

Dave, I had a problem with RF in my system. I live close to a few high powered AM stations. I replaced ALL my Cardas cables with Canare. Problem solved and the sound is great!

Rayd
dfrigovt OP
38 posts
 
Rayd,

I didn't even think of this until you mentioned it, but there is a country radio ststion up the road about a quarter of a mile away. That could very well be the root of the problem. I will look into the Canare cables. Thanks for the heads up.

Dave
Log in to respond
More to discover
80x80
RSX MUSIC SERVER RSX MUSIC SERVER
80x80
Ayon Audio S-10IIxs
80x80
Ayon Audio S-10 II Signature Network Player DAC Preamp
AWARD WINNING - REMARKABLE!