I fail to see the relationship between the speed of sound in materials and the material's damping qualities. The speed of sound in the material just indicates the delay for the vibration to be felt (or influence) at the receiving end, has nothing to do with the the amplitude of the vibration, which is, indeed, influenced by the mass of the conducting medium.
Bob P. |
"An intelligent answer for once!
Granite rings like a bell: please explain, any data or proper observations on this?"
Hi,
This one is easy to answer. Granite is one of the worst possible materials for a turntable for the simple reason that sound travels through it several times faster than it does through water. It is made up of crystalline particles which are bound tightly, so there is no damping offered at all. It is pretty, however. Choosing such a material just because it is heavy, or looks good, which is the likely reason, is a big mistake, if the goal is better sound. One may as well use glass. Actually, using glass would be an improvement, although slight. It is a no-brainer, really.
Here is one reference. A search found it in less than one minute.
http://www.sv.vt.edu/classes/ESM4714/Student_Proj/class95/physics/speed.html
Regards,
mosin |
How about a carbon-fibre frame filled with lead-shot and/or sand?
Would that reduce the cost of the plinth while giving the benefits of rigidity? |
Thank you, Teres Audio, for the clarification. |
"Also why not build a plinth from carbon-fibre....is this too difficult or expensive?"
We have done some experimenting with carbon fiber and it sounds very good. The texture and detail that we hear with dense hardwoods, but lacking some of the warmth and delicacy. A very good material but in our opinion not quite as good sounding as hardwoods and quite a bit more expensive. |
The comment from Chris of Teres is obviously intriguing.....I wonder if carbon-fibre is used in Teres' new composite material for their latest platters....
Also why not build a plinth from carbon-fibre....is this too difficult or expensive? |
Chris,
A truly excellent, objective summary of the subject, thank you.
"I personally believe that a well implemented unsuspended turntables deliver more satisfying and accurate sound. But I certainly can understand why someone else may prefer the "suspended" sound."
As for myself, I belong in the latter camp, having just purchased what I believe is one of the best implementations of the suspended types - the Sota Cosmos. But I can certainly understand why someone would prefer the "nonsuspended" sound! |
Dear Pbb: IMHO I think that there is no single right answer to your questions because the subject is much more complex ( many individual factors and inter-related factors one. ) THAT WHAT YOU ASK.
TERES ( and other persons )ALREADY POINT-OUT ( posted ) MANY INTERESTING SUBJECTS ABOUT AND PROBABLY i CAN'T ADD NOTHING MORE BUT I THINK THAT THE NAME Of THE GAME IN THE tt DESIGN ( LIKE IN OTHER AUDIO ITEM ) is the quality design level it self, it does not matters : suspended, unsuspended, heavy mass, low mass, etc, etc..
We can have great heavy/low mass TT all depend on the quality design and quality execution of that design.
The TT design is a whole TT design where different factors/subjects have different ºgrade level priorities and where when you achieve one of your targets you loose some other one or at least you can achieve this one.
For me other than speed accuracy and speed stability ISOLATION ( internal/external ) is a primary subject of paramount importance in a well designed TT.
Here you can read what I already posted about in other similar Agon thread:
http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1202574416&openflup&19&4#19
http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1202574416&openflup&28&4#28
Other thing is that almost all of you are thinking in a belt drive TT and we have to remember that we have direct drive and idler TT designs that are very good ones too.
Regards and enjoy the music.
Raul. |
I figured as much re: resonance diodes. Thanks again Teres! |
My observation having seen and heard many tables over the years is that heavier tables are better in general. But there is no single ideals weight/mass for a table....its a moot question. Also, I would not advise going after the biggest and heaviest table and assuming that you got a good sound value. |
For starters I think the "resonance diode" concept is far fetched. I cannot envision any theoretical basis for such a device, and simple cones do not behave as a "diode".
The principles behind resonance energy transfer are well understood and quite logical. But understanding how to apply those principles in real life situations is often very complex. That's where the art of audio design comes in.
I believe that elimination of vibrational energy is one of the most important parts of good turntable design. Vibrational energy cannot be removed but it can be converted into another form. Damping mechanisms of all types convert vibrational energy into heat. Damping and energy dissipation are synonymous terms. If a device does not convert movement to heat then by definition it is not a damper.
Another important principle is the conduction of vibrational energy. To dissipate the energy you often need to conduct it to a different place. That is where cones come in. They are often referred to as isolation devices but the opposite is true. Cones are very good at conducting energy and that is why they work well. Cones under a CD transport will conduct vibrational energy from inside the transport into the underlying shelf. Cones are effective when there is more internal vibrational energy than external. More often than not the worst vibrations are emanating from inside of a component. Yet common audiophile thinking is that components need to be isolated. If that were the case cones would make things worse.
Turntables in particular require energy dissipation. The stylus/record interface generates a remarkable amount of vibrational energy. To keep that energy from bouncing around and mucking up the sound it has to be dissipated (converted to heat) somewhere. In many cases the primary mechanism is the suspension. Even though suspension does provide some isolation I believe that the energy dissipation aspect is far more important. In fact effective isolation without energy dissipation would produce very poor results. Vibrations would have no place to go so they bounce around in the turntable causing trouble.
Most, but not all unsuspended turntables utilize some sort of internal damping to dissipate energy. We have found that loose lead shot is a very effective damping medium. Considerably better than constrained layer or any sort of
suspension. So the same principles are at work with both suspended and unsuspended turntables. The methods are different and the resulting sound is also different. However, I believe that the primary benefits of both are from energy dissipation and not isolation.
There is a common misconception that an unsuspended turntable is more susceptible to external vibration. In my experience there is little difference in absolute terms. Both types of turntable respond well to being placed on a rigid, stable platform. Both types of turntables can be negatively affected by footfalls and springy floors. Exactly how they are affected in a given situation may however vary widely. But as far as I can tell there is no inherent advantage for an unsuspended or suspended turntable. Better implementations will tend to be less affected. In many cases I think it is simply synergy. A particular design may work flawlessly with one stand, floor and room combination and perform poorly in another. Just read the forums. You will find diverse opinions and experiences not because people are biased or nuts, but rather the real life experiences understandably different.
While I do not think there is much difference in sensitivity to external vibration for suspended vs unsuspended turntables, I am not implying that they sound the same. I personally believe that a well implemented unsuspended turntables deliver more satisfying and accurate sound. But I certainly can understand why someone else may prefer the "suspended" sound. |
Teres,
thank you for your obviously informed input. Do you care to comment about the relationship of the above to evacuating/dissipating/damping resonances. Is there such a thing as effective resonance diodes, IOW, one way channels for resonances. Thanks again. |
Chris, I wish you had chimed in on the suspension vs. non-suspension thread. Probably would have saved me from butchering the subject. :-) Granite rings like a bell: please explain, any data or proper observations on this? It does. You can google and find lots of references. I tried granite as a shelf material under my table. The result was a smearing of the lower mid-range. So now I have Stillpoints under my table until I find a better solution. |
An intelligent answer for once!
Granite rings like a bell: please explain, any data or proper observations on this? |
I think the the issue of turntable mass is largely misunderstood. The more important issues are rigidity, damping and rotation stability. Mass has little if any direct impact on these key issues.
Rigidity is very important and it often requires a lot of mass to get it. A good milling machine weighs at least a half ton because it needs to be very rigid. The most cost effective way to get rigidity with a mill is to use lots of steel and iron. You can get the same rigidity with lighter
materials but it would just raise the cost with no benefit. With turntables there are a lot of ways to get rigidity and the most cost effective ways tend to also be heavy. So rigidity is the goal and mass is just a side effect. Heavy turntables will often have superior rigidity, but this is not always the case. For example a carbon fiber base will lighter and more rigid than one of the same dimensions made from aluminum.
Damping is also frequently misunderstood in it's relation to mass. Adding mass to a turntable (or any structure) can not by itself increase damping. The argument of high mass being more difficult to excite is bogus. A 150 pound chunk of granite rings like bell. It take no less energy to get 150 pounds of granite to ring than it does a wind chime. However, like rigidity, effective damping techniques are often also heavy. Sand and lead shot are very effective
and simple ways to damp resonance. It is not the mass that helps it's the damping. So once again high mass is just a side effect of some of the better methods for damping.
Rotational stability is certainly affected by mass but there is much more to the story than meets the eye. Mass mostly effects the frequency of speed perturbations but it does not make speed more constant in absolute terms. A heavy platter responds to a perturbation with a small speed variation but it distributes that variation over longer period of time. Conversely a light platter will have larger speed variations but the recovery will be quicker. Most, but not all, prefer the resulting sound of a heavy platter.
So in the end high mass turntables will often be superior to their lighter weight peers. But if so it will be because of better rigidity, damping and/or rotational stability, and not because they are "heavy". |
Rega is all about low mass, high rigidity. That's one "very elegant" way to go. It is effective in many ways up to a point. IMHO, ultimately, high mass will prevail. (see my system) |
There is no ideal mass and in and of itself a turntables weight is meaningless. The proper mass can only be discussed within the context of an overall turntable design with the critical factor being the type of suspension, if any. You can make an excellent low mass turntable, but the cutting edge designs all seem to be quite massive. That could mean high mass is necessary or it could also mean that it's easier to design and build a high mass turntable than a low mass design of equal sonic merit. |
Why would you want to make a tt any heavier than a P9?
Is it not a very elegant solution to the task of spinning a vinyl disc? |
I don't know if there is an "ideal" weight. But if there is one it is significantly more than the weight of your P9. ;-) Just kidding, slightly.
|
I am sure there is much research on the subject. My opinion is just from a layman's point of view. It looks like the most successful designs are ones that incorporate heavy massive structures with substantial and extremely heavy layered platters. |
Please see posting "poor Man's aesthtix" and click on pedrillo's system. |
