What Could Cause Center Image To Present Lower than Expected


I will preface with admitting, that I am not an audiophile, but a hobbyist at best. Purchased Totem Acoustic Forest Sig. I am powering them with a ModWright  KWH 225I with Morrow Audio Sp7 speaker cables. My primary source is an Ayon S10 MKII network player/DAC feed by Small Green Computer (ROON) with Snake River Audio Mumushi Sig XLR interconects.

Integrated/Player feed with Morrow Audio Elite Power cords from a Shunyata PS8 w/Defender. PS8 connected with Shunyata Alpha v2 NR power cord.

Room is 13x19. Speakers 7' apart and 4" from front wall and 2.5' from side wall. No toe-in.  Audio equipment behind speakers along short wall with TV above mounted to wall. There is an 8x10 decorative rug hung on wall behind tv/equipment.

From the get-go, I have been very happy with sound and center image / soundstage present without fiddling with anything. Better than my ATC SCM19 v2.

My issue is with how low the center image presents.  Not sure how to proceed. Where to start. Is it most likely a speaker adjustment or component issue? I know my room is not properly treated.

Scott

amboguzzi

Showing 5 responses by amboguzzi

My mistake. They are 4 feet off the front wall. It has been a busy week, but I started with reducing the tilt. That has made a small but noticeable difference. More tracks sound fuller. Sorry for not having a more audiophile description. I am trying one thing at a time and listening awhile.

Next step will be to bring speakers closer together.

My listening position is roughly 7 feet back from the speakers.

Again, thanks for the responses.

Scott

OK. This is getting to be very frustrating. The first adjustment was reducing the tilt back. Or approached level. At first, I thought I noticed a slight change in image height; however, after further listening I can't confirm this change. So, I decided to move the speakers closer together. From 7' to just under 6' apart.

This, also, did not affect the level of the image, but it did negatively affect the soundstage. It was reduced in width but maybe deeper? But the strange thing was the image was affected too. And this is where it gets strange. The first time listening after the move, the image was not as centered.  I then thought about returning the tilt to the speaker. This did not seem to do anything. I decided to try something that I had read about and closed my eyes and things kind of came together but still no change in image height. 

Lost but not defeated.

Question - in a perfect world --- should it ever appear that an instrument is coming directly from the speaker in the soundstage? Or should everything be presented in an open space? I hope this question makes sense. 

Scott

After many adjustments, hours of listening and one major addition, I have come to the point where I need to work with the room. I am still @ 7' apart but now 56" from the back wall and sitting in that 7'-8' away. I was able to get a slight rise in the image. 

During this time, I have also introduced subwoofers, which absolutely blew my mind. I was able to audition a pair of REL T/7x's. This did nothing to the height of the image, but I was able to experience how subs do more than provide low frequencies. I listened for hours and enjoyed the enhancements. I had the opportunity to talk with someone who previously sold both Totem and REL products and suggested than the sub I should use is the S/510. He stated a whole bunch of audiophile terminology, but it was his expressive explanation that drew me in. I returned the T/7x's and ordered the S/510's. He was completely correct. It made a noticeable difference, and they were easy to integrate with the Forest's.

Now, I borrowed a Nordost system set-up & tuning disc. After going through the set-up tracks, I had two areas, which I think are related to my issue, that my system (so called) "failed"

Track - LEDR Tone Up - which created a sound that was to rise straight up from each speaker to @ 6'. My experience was the tone rising up and at the top it moved toward the center. The included manual states that this could be from strong reflections. Also, stated problem with tweeter but I will assume that is not the issue. 

Track - LEDR Tone Over - which created the same sound but originates outside of the speaker and works across to the other but in an arch, with a peak at the same height as the Tone Up from above. I was able to hear this; however, the tone only rose about half the height, if that, as the Tone Up.

So, this is where I would like to start with room treatments, but not sure what to use to address the issues stated above.

Looking for suggestions as what to use to begin this new journey in my audio education.

Thanks

Scott