What 2 channel Amp would you Buy for $6k?


I plan on spending no more than $6k for power amp (tube or SS), but would like to hear from others what amp they’d get. I’ve done plenty of research, but honestly, I’m burn’t out and now would like to hear from others.
roddyboy
Another Pass 250.8 fan here. Great sounding will drive almost anything speaker wise.
Well, 3 years later i purchased a pair of Brand New McIntosh MC501's, store demo C2500, NAIM NDX 2/XPS DR (Streaming), and still have my BOSE 901 VI. The speakers are the weakest part of my system, so maybe B&W 800D vs 800D2? What's your thoughts?

I know this thread is old and you bought the McIntosh MC 501Mono blocks I wonder if you are satisfied with the 501Mono blocks?  I have owned mine for 15 years back then I was driving B&W 802N Speakers and before I bought the Mac's I owned a Krell 600c ,I've been very happy with the McIntosh 501Mono blocks they still sound fantastic! Now I have Sonus Faber Amati Homage speakers with ModWright LS 36.5DM Tubed Linestage a killer combination, it's funny I called McIntosh about replacing the caps the rep told me wait about 15 more years! I asked him about the new 611 he said hang on to the 501Mono blocks there way under rated. Happy listening my friend! 
whatever you choose, when considering costs, don't forget resale value...the Pass X250.8 bought used will probably not lose much, if any value over the next 2-3 years, while homemade, or lesser known amps may lose much more, and cost you more in the long run...just assuming you won't keep whatever amp you buy forever...
Post removed 
Save yourself some money by going on a different path: less known brands that are offering amazing products for fair prices. Most of them are class D, like Class D Audio, Ghent audio and Temple Audio (I just bought the monoblocks from Temple Audio, soon will post a review).
Or the small, cheap and extremely fantastic KingKo Audio, a tube integrated amplifier that is also a headphone amplifier.
If you want to go boldly I can sell you my Line Magnetic 219ia for much less than 6k. And this is a musical beast! Just check all the reviews. (just too big and heavy for my back and my room, that’s why I go smaller from now on).


Pass 250.8 used would be the best sounding and best bang for your bucks.Enjoy!!
What speakers are you driving? That should be the determining factor. If your looking for nice amp IMHO you should look for a BAT VK-200 for about a $1000 or Pass Aleph 5 for about $1500 take the remaining $3500-$4k and buy some storeable food because when the North Korean (DRPK) EMP hits you wont be able to eat your stereo...
OP….

Congrats on the 501s!!!

Although my ‘take’ on them and your own differs somewhat, I read you are well pleased. That’s great.
I honestly felt they were the more ttransparent of the two listening to them on Mac Speakers. More lively. A tick less colorful than the Big 602 which was IMHO a very good amp.. therefore, didn’t think on 802s it was the best possible fit.

Glad it turned out otherwise in your outfit.

Listen long and prosper.


For less than that I can sell you my Line Magnetic 219ia. Mint condition, gorgeous sound. Magnificent amplifier, just not what fits me best, it's a shame...
mc452 here.  So far a fantastic amp!  Also c52 pre.  The solid state preamp made all the difference imo!  Great punch with great detail!   
If I had $6K to drop on a power amplifer, I would buy a pair of Arion Audio HS-500 hybrids.  I have heard these several times, and they are excellent.  Lots of power, and they don't sound like Class D amps.  Liquid and clean.  ArionAudio.com.
Audio Note (UK) Vindicator Silver Signature (2A3 SET).

You’ll be amazed at what 3.5 watts can do, with some good SET friendly speakers (90+ dB efficiency), like the AN Es.
Of the many amps mentioned and the speakers you have I think I would consider three brands; Pass, Parasound JC1 monos and McIntosh.
Pass build great amps for great powerful sound. McIntosh also make very good amps with tremendous resale value. Parasound would offer a great sound, stellar designer (JC) and the best value, most power. My two cents. BTW I own Parasound...
Also if those 802s have an internal amp, you can go with a tube amp. ARC and Line Magnetic Audio make some killer tube amps. Line Magnetic SET would be my first choice.
Post removed 
If you’re looking for tube gear, I have a Decware Torii Jr that sounds good and recently upgraded to Audion Siver Night 300b Special Edition. I’m loving the Audion paired with Zu Audio Superfly (101db) speakers. With only 8 watts I usually only dial in 1/4 of the volume and it delivers plenty of punch, dynamics and detail.  
Someone already suggested Krell Fpb350 mc. I second that, or stretch for a pair of Fpb450mcx amps. Same chassis, different driver board and newer. Both world class amps that are amazing. Enjoy....

Perfect_sound

My speakers are Magnepan 20.7s

Amps I have had 

Mcintosh 452
Sanders Magtech
Bryston 4b3

Of all of those the Bryston is by far the best, the worst is the 452, weak base on the 20.7s and not a great sound stage.
Something in the Pass Labs lineup would work very well, depending on your power requirements. I love my Xa30.8. One review says that it competes with a highly regarded SET  amp (can't remember the name offhand) that sells for over 20k, plus you get the firm low end punch that comes with SS. It's very conservatively rated at 30 watts. It's easily driving my Vandersteen Quatros. I bought mine used for just under 5k.
Roddyboy , I think your question is strange , would you not choose the best amplifier to mate with Speakers you use ? I would think most would research this with other owners or even the manufacturer of your speakers , correct me if I’m wrong but isn’t that how it’s done finding the best amplifier that will drive your speakers optimally ? 
Sanders
Benchmark AHB2
Coincident Frankenstein MkII
Bryston cubed series
FirstWatt
Pass XA30.8

depends on taste, power need, gear etc

I would not spend $6,000 on an amplifier. There are plenty of good value amps out there for 1/3 of the price. Just make sure you get adequate power. Look into used gear or even pro audio. A used McIntosh would be a good choice. +FD 
It’s hard to say what you will like in your system. If you have a local dealer, maybe they can let you borrow a few different amps. Else I suggest purchasing an amp from someone that has a generous trial period / return policy and will not hassle you should you want to send it back.

I use a Sanders Sound Magtech. It’s wonderful and dynamic and right at $5 with lifetime warranty. It’s 900 watts per channel into 4 ohms. It has 20 transistors per channel in the output stage, which can handle 7000 watts. For this reason there is no protective circuitry like other amps. That means no chokes!  It doesn’t get hot even at full blast. It can be left on all the time and uses next to no power at idle. It’s the only fully regulated transformer; it regulates both current and voltage. And it has been an Absolute Sound’s editors choice for many years now.

If I were to dare try another, I’d want to try the PS Audio BHK Signature 250 amp. It’s a little more than what you want to pay, but I think PS Audio will give a good discount if you trade in your amp to them. Just a thought.

Best of luck!

Jason
By the way, speaking of McIntosh amps, macs always under rated their specs, for example my MC 601 monos (600watts) are actually over 850 watts in reality. The 501 are probably in the 700 range.
I agree with the McIntosh MC-452 comment above.  I spent the same amount for a mint condition six month old unit and haven't looked back since.  Imaging increased significantly from my previous amp (MC-301).  Go for it. 
Nobody can recommend an amp by itself without knowing your sonic preferences and the rest of your chain from source to speakers. Ignore any and all advice from those who do. And, if you want good advice, then provide this info.
ljgm is exactly right. 
We are living in a golden age of hi-fi and there are ... what? 20 amps? 30 amps? that would suit your needs.  All info would be good, but to fine-tune the options at an absolute minimum you should include your speakers.  In fact the amp/speaker combination can be seen as a single unit ... active speakers anyone. 
(I am running Pass Xxxx.8 at the moment.  If you can live with its downsides of the .8 - weight, heat, warm-up time then it will drive almost any speakers in almost any room.)
If you can have anything, I'd definitely opt for  Classe DR3 VHC. They only made around 180 of them and they're hard to find, but usually go for c. $3K unserviced and $5K serviced.

They will run absolutely any speaker ever made, including 1 ohm speaker killers like the Apogee Scintilla with 1 ohm impedance.  Only 45 watts but they are Class A watts and if you need more power, buy two and bridge them.

The only other amp I'd go for are almost impossible to find - Levinson ML-2.
That's probably true, but let me ask you something. What do you think about Mcintosh products compared to Are and Rowland?
No, I'm not trying to change the presentation, I just want as much information as possible. With so many being sold i thought someone would bring up the issues surrounding this MC501 mono-bloc. 

Anyways I bought a brand new Mc501 mono bloc for 4750. I want to thank everyone because believe it or not, I researched at least 40% of what was suggested, but when it came down to it, my decision came from everyones feedback and what I read and researched online. I may have overpaid a little bit, but it was under the $6k I thought I'd pay, so I'm happy.  

What sold me on the Macintosh was the information I took from Mc501 owners on this discussion and what I read online. Consistently, the reviews describe this AMP as being warm and full bodied with tube like sonic character. It does say the tonal balance is a little dark, but I doubt I'll notice. On a lot of the music played, it described hearing the drums beating a little harder and you feel it.

I could go on and on, but In a nutshell, my decision was made base on these questions; What company has been in business longer than McIntosh? What products have a better reputation for reliability? What products have a better resale value? What products have a higher Wife Acceptance Factor? And what speaker can this amp not drive? And let’s not forget, its easy to enjoy music with these things. It is for these reasons that the MC501s represent the lowest risk audio purchase one can make. It's the total package! THANKS EVERYONE, REALLY, THANK YOU EVERYONE!
hi!

I’ll second the note on sheer popularity. Its like why are there so many Toyotas for sale?

I’m getting the impression from this post that you want to change the presentation somehow. Other’s seem to perceive that as well.

Exactly what sort of presentation are you trying to obtain? Looking to tame something? Increase something? Improve things overall? What?

As for preamps…. Houses make preamps for their own associated amps. That should be plain enough. Will or can these preamps be mixed with other amps? Well, that’s why we are here and the interesting aspect of the past tie. Isn’t it?

A former Krell KAV 250 I owned was incredibly dynamic, very extended, but until It was paired with its partner preamp, it was just too too too much thru much of the bandwidth, especially up top.

With bAT it was a bit different. Stay in your house, and there is gonna be built in synergy. Roam beyond and its almost anyone’s guess what will occur. UNLESS, one of the amps uses tubes. Then you can better adjust the sonic parameters to your preffs… or merely towards performance.

I’ve owned several models of BW. I’ve not yet met a BW speaker that doesn’t like power. Nor, have I met one that hasn’t needed tubes in the chain somewhere. Usually at the source or preferably, the preamp. Their top ends are an area one must ‘respect’ or address, for these guys to be stellar performers.

Some yers ago, BW usually were in the salon as either Krell or Levinson. Why? Both have excellent bottom end production. BW are OK in the lower areas but exell with those two amp brands even more.

Keeping at or above 300wpc should improve things noticeably. Albeit, IMO that ain’t the end of the line.

I’ve heard the Big Macs and as decent a power amp as they sound each one has something a bit different to offer. The 500 monos were IMO the more transparent. The 601 2 ch amp seemed the best fit for a BW 802 IMO. The 600wpc monos might be the best fit, if, again, a preamp with tubes in it were in the mix.

If memory serves, a MAC 602 or 601 2 ch amp weighs about 140lbs. ouch.

The note on BC 600s and keep the change is a good pick. Easy sound. Good power. Balanced thruput.

A Levinson with good power would be decent fit too.

Not heard it, but on paper the PSA hybrid monos seem pretty interesting and there seems a few available fairly often within the budget. Rolling that tube in each amp, and trying different Power Cords might lead to Audio pleasure city. You’d get tubes, poer, flexibility, not a pair of space heaters or back breakers to lug about compared to the Macs.

Lastly, room acoustics and their treatments may be in order. For me they wuld if I owned anything in the BW 800 series despite the iteration. But then, I don’t have your ears.

Good luck.

Post removed 
PASS x250.5 

I've been using my Pass X250.5  to  light up my B&W 802D's for several years and have been extremely happy with the results. And the people at Pass are wonderful to deal with if and when you have to. 
@vegasears That is a great preamp. As far as the amps go, there is great synergy with McIntosh amps and preamps, they are made to go together. Some will disagree saying the amps are great but not the other components, I disagree when talking about the amps and preamps, they are great together, IMHO.
I only see one available for sale on here. It's the age old question on Agon, why does it seem like there are so many of something for sale. It's simply a matter of the number of units made. There's always McIntosh gear for sale because they sell so much of it. It's just a numbers game. The more there is, the more there is going to be some available for sale.
Roddyboy,

I use VTL 450 tube amps with B&W 801 Series 3 speakers.  In the past, I have used Classe CAM 300 SS amps with the 801's. If you are into hard pounding bass tubes may not be the way to go with your speakers.  Don't get me wrong tube gear do bass great but it just lacks a bit of a punch with most of the tube gear I've used.  The Classe amps I had, had good bass a nice mid range but the upper frequencies seem a slightly recessed or maybe veiled presentation best describes it better. Recently, I purchased my first Mcintosh gear, a C2500 Pre-Amp and love it, I don't know what there amps sound like but if they anywhere near a nice the pre's I'd think hard about Mc amps
First I would like to prematurely thank you Michaela. I'm leaning towards the MC501 amp, but there's something that's been bothering me a little. Why do you think so many people getting rid of them? I mean a lot!
@roddyboy The MC501’s have been replaced with the MC601’s but you would be hard pressed to hear that much of a difference, or so I was told by a McIntosh rep. They had a trade up program not too long ago and I inquired about upgrading to the MC601's and was told by the McIntosh rep that it really wasn't going to be worth the extra money. How's that for honesty from a manufacturer! The MC501’s sold for $ 11,000.00/pair and the MC601’s sold for $ 14,000.00/pair. Used, the 501’s go between $ 5,500.00/pair to $ 6,500.00. The 601’s are in the $ 8,000.00 to $ 9,000.00/pair range.
If your burnt out from your research maybe try approach from the other end.  Are there any speakers you particularly like (sonically)? Here in England (UK), there are many who like the ATC speakers and will seek out amplifiers which would go well in synergy with the speakers in order to get that sound (glorious midrange)...  Its just another approach.