Watts and power


Can somebody break it down in layman's terms for me? Why is it that sometimes an amp that has a high watt rating (like, say, a lot of class D amps do) don't seem to always have the balls that much lower rated A or AB amps do? I have heard some people say, "It's not the watts, it's the power supply." Are they talking about big honkin' toroidal transformers? I know opinions vary on a speaker like, say, Magnepans - Maggies love power, right? A lot of people caution against using class D amps to drive them and then will turn around and say that a receiver like the Outlaw RR2160 (rated at 110 watts into 8 ohms) drives Maggies really well! I'm not really asking about differences between Class D, A, or AB so much as I am asking about how can you tell the POWER an amp has from the specs? 
128x128redstarwraith
clearthink And the result, of such "modern manufacturing" is a product that sounds awful but hey it’s a "lower margin market" so that is to be anticipated and expected.

If it existed it would be PA, junk and it wouldn’t be getting it’s 1500w from a well designed amp with great current ability that can double down from 325w @ 8ohm and 750w @ 4ohms.
No, the 1500w would be the result of residue from current starvation from an amp that was originally 6000w or 8000w at 8 or 4ohms, and it would sound like junk

Cheers George

Post removed 
All of this amp conversation has me wondering what amps would best fit my pairs of Focal 936s and Focal 906s. They sure are audio file sensitive. I imagind they are also amp sensitive as they dip to 2.8ohms I believe? 

Regardless I'm not using anything special at the moment. Rotel rx-1052 receivers with external schiit audio DACs. The 906s seem happy. It sounds good to me but the 936s seem to be missing bits of full range or any kind of real authority punch youd expect from a tower speaker. 
1) I have never made any claims about the SQ of the amplifier.

2) Do you have proof it cannot deliver the required current into 2 ohms to achieve 1500W?

3) What does "residue of current starvation" mean?   Are you implying they are selling an 8000W amplifier for < $400 now?  


Please explain in some detail, as you keep avoiding this, why you believe it is impossible for a Class-D amplifier to work properly into 2 ohms.


If it existed it would be PA, junk and it wouldn’t be getting it’s 1500w from a well designed amp with great current ability that can double down from 325w @ 8ohm and 750w @ 4ohms.
No, the 1500w would be the result of residue from current starvation from an amp that was originally 6000w or 8000w at 8 or 4ohms, and it would sound like junk

After all of the back and forth regarding the watts issue, I was wondering if there's a simple device like my Radio Shack multimeter that could be stuck on the speaker output (or speaker input) jacks to see exactly how many watts I'm using to drive my allegedly 99db sensitive speakers at the levels I generally use. I know Nelson Pass uses something (and he likely has many bits of testing gear) like this at times while listening as it was referred to in some interview...the interviewer noted how few watts were used relative to the levels...I wanna do that...can I?