I've got Omega eMats in lots of places throughout my system. It is easy to cut and shape to use around outlets, transformers, etc. Okay, so I have used this stuff directly under and inside different components. The best is probably inside speakers, around crossovers and drivers. But really "the best" is not a lot better, it is pretty close to the same everywhere. Everywhere. I put one inside my breaker box. This is clear across the other side of the house from the system. Near as I can tell it had the same improvement as one used inside the room on a component. Okay so then I put one on the meter box. Another 30 feet further away. Same thing.
Well therefore logically, so I cut some into strips and zip tied the strips along the whole length of the AC from the panel to the room. That is just one of three or four things done to this wire.
And the comments on my system page start to take on a whole new meaning.
Well therefore logically, so I cut some into strips and zip tied the strips along the whole length of the AC from the panel to the room. That is just one of three or four things done to this wire.
And the comments on my system page start to take on a whole new meaning.