Using a PS Audio Perfectwave Dac as a music server

Keep us posted on your thoughts about sound quality Levy.

You hit the nail when you talk about the concept (your entire music library accessible via one handy remote touch screen…It’s all too cool!

Your iPhone or iTouch will work as the controller - in fact, they are recommended. The software that you need for the controller is only $9.99 via iTunes and is a simple download. If you already own the PWD, then you simply must buy the Bridge - even if you own the PWT too.

Tomcy6:

Here’s what you’ll need in addition to the PWD and the Bridge:
1) Wireless Router (while not necessary, it may be beneficial to go with one that
includes Gigabit Ethernet and operates in 802.11 N)

2) Server (a server is the actual server software and the actual system that you run this
software on): You can download various server software, such as “Townky Server,”
“Asset,” from dBpoweramp, or PS Audio’s proprietary server, “eLyric.” You can use a
computer –PC, Mac, laptop, or Netbook – to load your software on, or you can
purchase a NAS – Network Attached Storage device – which will have some form of
server pre-loaded. This is an area of caution...there have been many reports of compatibility issues with various NAS/servers - research this area, or just use a computer.

3) Controller and Controller Application (the easiest solution is an iPod – iPhone,
iTouch, iPad, etc. – with PS Audio’s “Tag-n-Play” application loaded (only $9.99 via
iTunes).

4) Hardwired setup (not required, but certainly preferred). This will require a run of Cat5
(or Cat6 – although not necessary) – otherwise known as Ethernet cable – between
Server/NAS and the Router and also between the Router and the Bridge.

Note: the reason you need a wireless router is so the controller (iPod) can
communicate with the system wirelessly.

You asked what I am running:

1) Actiontec Q-1000 VDSL modem router

2) Twonkey server installed on a Gateway Netbook (N-450 processor with 2 GB memory)
(I plan to install “eLyric” once the bugs are worked out)

3) 8 GB iTouch (least expensive) with Tag-n-Play loaded

4) All hardwired.

It’s really not hard to setup, configure and play. You’ll need to know the security code of your wi-fi router – typically a “WEP Key” or a WPA code – because you’ll need to type it into the iTouch controller so that it will be able to communicate with your network.

You’ll also have to configure your server (Twonky, Asset…etc.) so that your network will see it and be able to access it (this is pretty much just following instructions via Twonky, Asset, or whatever server software you get).

If you get stuck, you can go to the PS Audio website forum, which is very helpful. You could also contact me or any other A-Gon members. We’ll be more than happy to get you started.

_Ben

Lev

Go here for good information about setting up J River server...

Let us know how you like your Bridge!

_Ben

2chnlben- are you SSW?

Woot

No, Woot, I'm not Streets Still Works. I am however on that site alot (Hint: "The Dude").

_Ben