TTWeights new Black Onyx Idler drive Turntable


About three weeks ago I drove to Newmarket. It is about an hours drive from Brampton, but I wanted to listen to Larry's 'Christine' turntable. When I got there I found Larry all excited about his newer turntable. A less expensive, more heavily damped version of Christine (and much less expensive). He explained to me how Christine was way overbuilt. There is no reason for a one horsepower motor, way overkill. His 1" carbide main bearing shaft was also way too much, and the shape of Chrisine's plinth did nothing for resonance control. Along comes the Black Onyx, still in R & D, so off I went back to Brampton.

I went back three weeks later, that was a couple of days ago, and with an armful of albums, sat down for a long listen. I will say that a long listen is not necessary. It took about ten seconds to realise this was something very special. Everything from Cat Stevens, Bruce Cockburn and Jeena Lodwick to Dire Straits and YES. Without fail, every single track on every album left me with goosebumps. Singers seamingly playing for me in his office did nothing for my bank account. He now has my deposit, and I wait patiently.

My turntables have all been belt drive. Many years ago I purchased a Heybrook TT2. This was commonly referred to as a baby Linn. My next table was a JA Michell GyroDec (mostly because I thought it looked wicked), and finally to the Teses 340. I will say the jump from the Michell to the Teres was only equaled by the next jump to the Black Onyx. I think I can safely say Idler Drive turntables are a wonderful idea. The Saskia is highly regarded, as is the new VPI. Both idler drive. If you can get to TTWeights for a listen, you'd be doing yourself a favor.

The rest of my system is thus; ZYX Universe cartridge, TriPlanar and Schroeder DPS tonearms, Atma-Sphere MP-1 mklll preamp, Atma-Sphere MA-1 Silver edition amps, EMM Labs CDSAse, Magnum Dynalab MD-108T tuner, and an older pair of ProAc Response 2 speakers. I sold my Coincident TVll'2 and am building speakers using Accuton mid and tweeter, with SEAS 10" woofers. Still months away.

My listening room is almost complete and should be finished about the same time as the Black Onyx. I will get back to you after that.
cousinbillyl

Showing 2 responses by hiho


Hi Bill. I have one question. Since the platter belly is carved out in a circle, is the idler wheel touching the outside rim or the inside of the platter? Is it the idler wheel rolling like the Garrard or is it rolling like the Teres Vertus? I can't tell from the picture. If it is touching the inside of the platter then wouldn't be more flexible to have the whole motor assembly being outside of the platter and surely would make changing O-rings easier. Anyway, I'm just happy to see a different approach to idler-drive design and that you are enjoying music through it. Thanks for all the updates.

____________

Thanks for the answer, Billy. Just for fun, here's a Japanese idler-drive design, Epson-Seiko by Mr. Takeshi Teragaki that has the idler-wheel, more like a pinch roller, on the outside of the platter, making changing wheel/roller or maintenance much easier. The Onyx still looks amazing - to be perfectly honest, it's visually more appealing to me than the much more expensive Christine.

http://www.audio-heritage.jp/SEIKO_EPSON/player/sigma2000.html

More fun pictures.
http://www.teragaki-takeshi.jp/works/players.html

__________