You're going to need to develop better soldering technique. Solder is not glue. To properly solder something so large you'll need a 100 watt gun, not an iron. Insert the cable into the connector, heat the connector sufficiently and the solder will flow into the joint. There are numerous online tutorials to help you develop better skills.
Tips on soldering Deltron Banan plugs
Hey,
I've tried soldering Deltron banana plugs to Mogami W3103 (12awg) but failed miserably.
Anyone have experience with these or similar plugs ?
I'm used to soldering RCA plugs where I put a blob on the connector that I reheat and connect the wire to.
On the Deltron plugs, there is no room to put the solder iron once the speaker wire is inserted.
Also, do you tin the speaker wire entirely, or just the tip?
Thanks in advance.
I've tried soldering Deltron banana plugs to Mogami W3103 (12awg) but failed miserably.
Anyone have experience with these or similar plugs ?
I'm used to soldering RCA plugs where I put a blob on the connector that I reheat and connect the wire to.
On the Deltron plugs, there is no room to put the solder iron once the speaker wire is inserted.
Also, do you tin the speaker wire entirely, or just the tip?
Thanks in advance.
3 responses Add your response