Thiel Owners


Guys-

I just scored a sweet pair of CS 2.4SE loudspeakers. Anyone else currently or previously owned this model?
Owners of the CS 2.4 or CS 2.7 are free to chime in as well. Thiel are excellent w/ both tubed or solid-state gear!

Keep me posted & Happy Listening!
jafant
yyzsantabarbara 

As unsound pointed out previous Thiels were laminate ,
my 2.7's are laminate but to assure yourself remove the coaxial speaker and look at the inside of the cabinet .
At the same time take the passive readiator out and if you have a multi-meter check the continuity of the wires to check for cross termination ,
something the repair technician shoud have done and discovered
during the repair ( I marked my tweeter wires with painters tape when I rewired to avoid the mistake you are describing ) .

And I would like to thank you for opening my eyes with your discovery of your speakers sounding the best you've ever heard at 6 feet apart ,
I know you have a small room but it got me thinking .

There is always something to learn by following this forum's conversations .

Rob
 
A couple of thoughts regarding moving speakers closer together. One should be aware that as one moves the speakers closer together that you would also be moving the speakers closer to the listener. As such, it could affect driver integration. In order to preserve the time coherence that Jim Thiel worked so hard to achieve, a minimum of 8’ and preferably 10’ distance from speaker to listener needs to be maintained.
Also, as I previously touched upon, yyzsantabarbara is considering using DSP RC. In which case the opposite closer to wall placement could be advantageous. In fact. when using DSP RC not placing them directly besides the walls could trade one set of problems for another. Ideally speakers such as Thiel’s own powerpoints would be used with DSP RC.
Without DSP RC keeping the typical Thiel speakers well away from immediate reflections is most advantageous.

I was also surprised at the amount of content from China on the CS3.7. I thought they built the COAX in house but Rob mentioned something about getting shipment of drivers and why they have the black coated new ones. I did not ask more questions on that but that article makes it clear. As does the fact that it is laminate with a veneer.

I am also looking at an R2R DAC for the Thiel system and I have 2 Chinese made DACs at the top of the list. So I have no issue with audio gear from China. I want to get my bedroom headphone system rebuilt so I can use my Benchmark DAC3B or the second DAC for that.

The previous CS3.7 repairs were not done by a repair person. It was done by the previous (or first) owner. The dealer seems to have also opened up the COAX driver screws to have a look inside and had over torqued the screws to break the threads (just fixed by me).

At the moment I have the COAX drivers off and the woofers and other parts covered nicely for sanding, staining, or if I get brave, painting. As I mentioned before it is so much easier to carry the speaker with the COAX removed.

The cherry color I have is nice but I always wanted something a little more distinctive for the office. When I was considering the Paradigm Persona 3F I looked at the customer color configurator and came up with a few color combos that I liked. I use the grill at all times (my 4 year old has never seen the drivers).

https://design.paradigm.com/en/persona/customize
Carbon Black Gloss (saw this in person)
Burnt Orange (I loved the KEF Blade in orange)

My new neighbor has a beautiful matte brown colored Mercedes. I was think of painting the cherry to a matte black to perfectly match the top aluminum shell which has been recently spray painted by me. I think it may look good with the black grill on. Just thinking out loud at the moment.

@yyzsantabarbara,FWIW, I typically don’t care for black finished speakers, but for the very reasons you’ve suggested, I think the black finish could help disguise the harlequin effect the often 3.7’s present to my eyes.
@yyzsantabarbara  I'm also going to get a R2R DAC and the one on my shortlist for my Thiel rig is the Aqua Formula xHD v2.Check out Totaldac they make very analogue sounding R2R Dacs too.