Thiel Owners


Guys-

I just scored a sweet pair of CS 2.4SE loudspeakers. Anyone else currently or previously owned this model?
Owners of the CS 2.4 or CS 2.7 are free to chime in as well. Thiel are excellent w/ both tubed or solid-state gear!

Keep me posted & Happy Listening!
jafant
thielrules

Thank You for sharing your Summer 3.5 project. Strong work- this model is beloved by many members of the Panel here. How we wish OEM drivers and parts were available for these Vintage loudspeakers?

Happy Listening!


@thielrules, Yes, as I said; I understand.

While upgrading componets in my McCormack DNA-250 amp ,
I discovered that Conrad Johnson dropped the McCormack from the name but continued to use design .
I've been using images of the MF-2550se for reference as to which componets to upgrade .
I found this artical that fits in with this Thiel speaker forum !

www.theaudiobeat.com › equipment › conrad_johnson_mf2550se

( excerpt from artical )

These are the sorts of details the MF-2550 SE served up best. The 300-hour Teflon Rubicon had at last been crossed.

Among the amplifiers I’ve heard in my system, the Conrad-Johnson MF-2550 SE stands out. Of those amps, its closest competitor in terms of price, specifications, and power is the Classé CA-2300. At $7000, this Canadian anvil delivers 600W into 4 ohms, and was quite capable of handling my Thiel CS3.7s -- and having spent many years with these speakers, I can tell you that, much like their predecessors, the CS7.2s, they will use every watt they can get. The MF-2550 SE produces "just" 400Wpc (confirmed by C-J’s Lew Johnson), but not all watts are created equal. The CA-2300 was a bit sluggish by comparison. The MF-2550 SE gripped the ’3.7s, handling every curve the music threw with agility and speed, and sounding significantly more transparent and musical (in all of the best ways) than the Classé.

Rob


Hey again, thanks for your responses to my post on Sunday! I also wrote Rob Gillum from Coherent Source Service, and he suggested I may have an "open circuit" on the voice coil - so I removed the fabric layer between magnet and dome structure and realized that the voice coil is broken at one point. Is there any kind of how-to guide you could recommend on replacing a voice coil? And can I use any old (or preferably new) 1" / 25.5mm voice coil? Thanks again for your help!
Jimi - work with Rob. A voice coil is connected to the dome and surround as a moving system. Moving systems are specific to their end-use with varying mass, compliance, impedance, wire gauge and geometry. Your CS1.2 tweeter was made by Vifa, and I don't know about its repair particulars, but Rob will.