I am not sure what "the" question is; I counted more than one. Only someone who knows the characteristics of all your components would have a chance at being able to help you decide on cable recommendations. One of those people is you, and you're opinion is the most important. I would start by replacing only ONE set of interconnects, between the Oppo and your integrated, and just listening for a few weeks to get a handle on what that change did. Then go from there. There is no way to shortcut this process, and you need to come to your own conclusions. You'll be happier in the end. Good luck.
the eternal cable question
Hi Everyone,
My goal here is to whittle down the mess that is the interconnect jungle with the help of my wise, knowledgable, and generous Audiogoners.
I have been researching and reading tons of stuff, Copper, Silver, Silver over Copper, Gold, Palladium, Rhodium, Fluids, 4N-9N, 99.999%, 99.9999%, 99.99999%, OCC, OHCC, OFC, Twisted, Helix, Double Helix, Solid wire, Stranded wire, Teflon, Air, Shielded, Unshielded, XLR, RCAs,.... Head Exploding!
Some of you have given me some great advice already but I have more questions.
There seems to be a rule of thought that Silver sounds better with Tubes and Copper / Gold sounds better with Solid State. And well made Pure Solid Silver will sound good with both. Of course I know that it will all depend on my own ears when it comes down to it. However is there some truth to that?
Is it true that mixing metals can produce different sonic results? Example... Gold RCAs will help tone down Silver wire? Or Silver Eichmanns RCAs can liven up Copper wire? It has been suggested that I use Silver plugs with Silver over Copper wire in teflon. That is the Morrow configuration.
Is it best to go with one company if they offer all the different cables or is combining different okay? You'll see from my list below that Almadi, Cabledyne, and Cerious do not offer a full set of cables.
Should I use the same company for interconnects from the VPI to the Herron and then the Herron to the Coda? The Herron is a Tube Phono preamp.
Would like to hear from those of you who own SS amps and or similar systems to mine. Those of you who own Tubes amps will have to convince me that your interconnects will sound good on SS.
My current system is
Coda CSIB Integrated Amp
Oppo BDP 105D
VPI Scout Turntable with an Ortofon 2m Bronze mm cartridge
Herron Audio VTHP-1 Tube Phono Preamp
Revel F52 Speakers
SVS SB13 Ultra Subwoofer
Furman Linear Filtering AC Power Source Conditioner ELITE-15 DMI
Currently running Blue Jeans between everything with 12 gauge copper for the Revels.
They sound alright. A little grainy in the upper ranges, Sound stage fluctuates with the recordings. The biggest thing is that I can't help but think that my sound can be better.
My budget is $1500 for all the cables and interconnects. Used is good.
My current list of cables to audition consists of Morrow, Almadi, Cabledyne, Cerious Graphene Extreme, Gabriel Gold Revelations.
Thank You for your time and generosity in teaching this Audio Grasshopper the ways of the Audiophile Force.
Peace,
Mark
My goal here is to whittle down the mess that is the interconnect jungle with the help of my wise, knowledgable, and generous Audiogoners.
I have been researching and reading tons of stuff, Copper, Silver, Silver over Copper, Gold, Palladium, Rhodium, Fluids, 4N-9N, 99.999%, 99.9999%, 99.99999%, OCC, OHCC, OFC, Twisted, Helix, Double Helix, Solid wire, Stranded wire, Teflon, Air, Shielded, Unshielded, XLR, RCAs,.... Head Exploding!
Some of you have given me some great advice already but I have more questions.
There seems to be a rule of thought that Silver sounds better with Tubes and Copper / Gold sounds better with Solid State. And well made Pure Solid Silver will sound good with both. Of course I know that it will all depend on my own ears when it comes down to it. However is there some truth to that?
Is it true that mixing metals can produce different sonic results? Example... Gold RCAs will help tone down Silver wire? Or Silver Eichmanns RCAs can liven up Copper wire? It has been suggested that I use Silver plugs with Silver over Copper wire in teflon. That is the Morrow configuration.
Is it best to go with one company if they offer all the different cables or is combining different okay? You'll see from my list below that Almadi, Cabledyne, and Cerious do not offer a full set of cables.
Should I use the same company for interconnects from the VPI to the Herron and then the Herron to the Coda? The Herron is a Tube Phono preamp.
Would like to hear from those of you who own SS amps and or similar systems to mine. Those of you who own Tubes amps will have to convince me that your interconnects will sound good on SS.
My current system is
Coda CSIB Integrated Amp
Oppo BDP 105D
VPI Scout Turntable with an Ortofon 2m Bronze mm cartridge
Herron Audio VTHP-1 Tube Phono Preamp
Revel F52 Speakers
SVS SB13 Ultra Subwoofer
Furman Linear Filtering AC Power Source Conditioner ELITE-15 DMI
Currently running Blue Jeans between everything with 12 gauge copper for the Revels.
They sound alright. A little grainy in the upper ranges, Sound stage fluctuates with the recordings. The biggest thing is that I can't help but think that my sound can be better.
My budget is $1500 for all the cables and interconnects. Used is good.
My current list of cables to audition consists of Morrow, Almadi, Cabledyne, Cerious Graphene Extreme, Gabriel Gold Revelations.
Thank You for your time and generosity in teaching this Audio Grasshopper the ways of the Audiophile Force.
Peace,
Mark