2. analog
  3. 1148482308

Technics Turntable question

Hi Folks,
I have Technics SL-D202 turntable circa 1979 that I got from original owner. It currently has some model Empire cartridge which I suspect should be replaced due to heavy use. My question is since I know little about turntables. What model/brand cartridge could I replace this with and where can I purchase this. I don't want to spend more than $100. Thanks for your help!
wjcorbin
8 responses Add your response
Ag insider logo xs@2x
rauliruegas
12,762 posts
 
Dear Wjcorbin: Here are two good cartridge choices:

http://cls.audiogon.com/cgi-bin/cls.pl?anlgcart&1153890123
http://cls.audiogon.com/cgi-bin/cls.pl?anlgcart&1153787095

Regards and enjoy the music.
Raul.
bignerd100
515 posts
 
Refer to Pabelson's post if you want your inexpensive set-up to sound better than it should. Even a very $$$ cart sounds bad if not properly installed.
wwwrecords
172 posts
 
If you can up your maximum by $10, I would recommend the Denon 110. It is a HOMC and it is a very good budget cartridge with Technics tables. You can get them from William Thackery on eBlob. He is the cheapest I have found at $110.
Post removed 
pabelson
344 posts
 
If you know little about turntables, I'm guessing you also know little about setting up a cartridge. A mediocre cartridge, installed propery, will sound better than a great cartridge installed badly. That argues for buying locally, from a hi-fi shop that can do the set-up for you, rather than online.
soulbrass
246 posts
 
Shure M97xe is a good budget choice (MM). <$100. Try Amazon.com.
joe_in_seattle
114 posts
 
I used an empire 2000 III in the 60's. It was OK, but I upgraded to a Shure V 15 and enjoyed much more of the sound. You might consider a Shure or a Grado at your price level. I think either of them would beat what you have and be very enjoyable.
bignerd100
515 posts
 
Grado.
Log in to respond
More to discover
80x80
ZYX Ultimate Exceed Omega
80x80
Mutech Hayabusa
80x80
VPI Industries Classic 3