2. analog
  3. 1060702992

Technics SL-10 Linear Tracking

I'm trying to break into the vinyl side of music and I would really appreciate any advice I could get on a hand-me-down from my Dad.

He hasn't used the turntable for at least 15 years, so operationally I have no idea what condition it's in.

The catch is that he misplaced the AC power cord so at the moment i cannot plug it in.

The AC power jack is a lot smaller than the standard size for audio components. The interesting thing is that there are two power supply imputs: the AC power jack and a DC power jack (12 V).

Should I just walk over to Radio Shack and pick up a 12 V universal power cord?

Finally, there is also a MM/MC button on the back, does that mean I won't need to buy a phono stage?

Thanks!

derek
mrdereklee

Showing 1 response by rudolphls

rudolphls's avatar
rudolphls
11 posts
 
If you can't find an AC power cord to fit then you can go with the DC power supply. As for the MM/MC switch, you will still need to use a phono pre amp. The switch only boost the gain from MM level to MC level. If you are using the original MC cartridge that came with the TT, and only have an MM level pre amp you can set your TT to MC and it should work fine. If the cartridge has been replaced with an MM version, then leave it set to MM.
After being in storage for a while you may experiance some problems with the arm wanting to stop in the middle of a track and go back to home position. Clean the track and apply a little sweing machine oil, that should help.
More to discover