Taralabs cables

“The Muse cable has extreme resolution…” – Positive Feedback magazine / Marshall Nack - 4/1/17 Issue 90
“As it happened, I had just gotten in new cables from TARA Labs. I inserted a couple of runs of The Muse interconnects between DAC –> pre –> amps. Yes, you know where the narrative is headed next. The view sharpened up. Edge details and textures came into focus—everything came into focus. These are very fast cables—no question about that.” – Positive Feedback magazine / Marshall Nack - 4/1/17 Issue 90
“The Muse relaxed, and musical flow, defined as how the sound moves from note to note, improved. I was happy to note the timbral palette was rich and varied. This is one of TARA Labs hallmarks.” – Positive Feedback magazine / Marshall Nack - 4/1/17 Issue 90
“The Muse signal cables demand to be auditioned as a system. In that implementation, I think you will be surprised at the sound quality delivered. These cables will not be going back to the manufacturer: they have found a home in my reference system.” – Positive Feedback magazine / Marshall Nack - 4/1/17 Issue 90 (Mr. Nack decided to replace his current high-end audio cables, and replace them with TARA Labs Muse series cables for his home audio reference system)
“With the full TARA implementation—a synergy developed that caught me off guard. The Muse vaulted to new levels of texture and transparency bundled in a very musical package.” – Positive Feedback magazine / Marshall Nack - 4/1/17 Issue 90
“With The Muse in stream, I'm playing more music from my collection and not just the audiophile-approved fare.” – Positive Feedback magazine / Marshall Nack - 4/1/17 Issue 90

PRODUCT TESTING
TARA Labs uses a variety of specialized testing procedures and equipment to ensure that every cable meets our rigid standards. Each cable must pass through a variety of stringent testing stations. Example: Point to Point Signal Continuity using Hewlett Packard and Tektronix spectrum analyzers to ensure that every cable has the correct specifications.
The final process is that each cable is evaluated and listened to in our sound room using a wide variety of audio components.

Making Sense of … Standard and SP version Speaker Cables
At TARA Labs, the major design goal for speaker cables is to reduce the inductance in the cable. However, there are some high-end amplifiers that need to 'see' some level of inductance (L) in the speaker cable. When the low damping factor of certain amplifiers is connected with (ultra-low inductance) TARA Labs speaker cables, the output of some high-end loudspeakers becomes audibly variable at different frequencies.Extreme Audio Systems and Extreme Performance Cables with Low Inductance specifically for speakers that require additional inductance in a speaker cable.
The phenomenon is readily apparent, heard as bass that is soft and low in amplitude, sometimes together with high frequencies that are too smooth or rolled-off. Basically, the resistance in the loudspeaker cable should be ultra-low, and the inductance (L) in the cable needs to be low but sufficient to provide a load to certain amplifiers. There is no ideal value for (L). It varies from system to system, just as impedance varies with frequency in most loudspeakers.
The loudspeaker cables carry much higher signal voltage and current into a non-linear impedance (the loudspeaker) ... so the reactive load of the loudspeaker can be difficult for some amplifiers to drive... and the all-important damping factor of the amplifier changes from amplifier to amplifier.
One of the great attributes of TARA labs high-end Speaker Cables is their ultra-low inductance. These Speaker Cables are the 'state-of-the-art' in both technology and design from TARA Labs. Its performance level is absolutely spectacular when matched with the majority of high-end audio components available today. And as with an ever increasing introduction of new components into the marketplace, we have found over and over again that not every cable or component has the perfect symbiotic relationship with each other. In these particular instances, there are some amplifiers that need to 'see' some level of inductance (L) in the speaker cable. For certain loudspeakers and amplifiers, these cables are designed to work exceptionally well with amplifiers with a low damping factor or loudspeakers with a very reactive load in the lower frequencies. In addition to inductance, TARA Labs SP model speaker cables are also designed for audio systems that are inherently bright or strident in their sound. They offer a controlled bandwidth by being more forgiving with glare or stridency.
 

Professional Concert Tour Cable




PROFESSIONAL CONCERT TOUR CABLE
This cable is made exclusively for the rigors & hardships of concert tours on the road. Cable is sleeved with a special “non-skid” jacket perfect for playing on stage. *The PX silentPLUG is fantastic for this cable as it allows a musician to unplug and switch instruments without the hassle of turning down/off your amplifier. (*See below CABLE TERMINATION)  (Click on image to enlarge)
INSTRUMENT CABLE INFORMATION
TARA Labs has taken its incredible thirty year expertise in cutting edge technology & design, and developed a high-end instrument cable. Used with guitar, bass, keyboards, or in the recording studio. Used in recordings by Stanly Clarke, Patrice Rushen, Kenny Burrell, and endorsed by such legendary musicians and producers as; Larry Carlton, David Benoit, Nathan East, Jeffrey Webber, in addition to such prestigious venues such as Carnegie Hall, Capitol Records studio, Sony studio.
CABLE CONSTRUCTION
Every TARA Labs cable is custom hand-crafted to order in Oregon, USA. The construction of this cable begins with our RSC (Rectangular Solid Core) SA-8NOF (Super-annealed, oxygen-free, mono-crystal, frequency-tuned, hand-polished 99.999999% pure copper conductors. This is covered with advanced Aero-PE dielectrics and skid-resistance outer sleeve.
CABLE TERMINATION
TARA Labs also makes available the “silentPLUG” for cable termination. The new PX silentPLUG automatically mutes (shorts) an instrument (guitar) cable to avoid pops and squeals when changing the instrument (guitar) under load. The integrated silent switch is based on REED-technology and guarantees a lifetime beyond 10 '000 mating cycles. The new PX silentPLUG features a rugged metal shell enhanced with a rubber cushion overlay for improved shock protection. The plug itself is gold plated. The “silentPLUG” is exceptional when used in situation where instruments are being interchanged, without having to either turn-down or turn-off the amplifier. All termination is gold-plated.
*Straight plug & Right angle plug available / ¼” mono or stereo termination connectors are available
CABLE SOUND
You will hear exquisite high frequency extension, tight bass, spatial cues, and full mid-range that is detailed and open. A low-noise floor, and excellent sound-stage. Both cable models offer superior quality. These cables are far beyond any other high-end instrument cables available in the marketplace today. Endorsed by the worlds leading recording studios, music venues, and musicians.
For musicians and producers who demand the very best in equipment, instruments and recording.
WARRANTY
All TARA Labs cables have a lifetime guarantee against manufacturer defects.