I like that integrated amp a lot. It has enough power for just about any application. It sounds full, authoritative, dynamic, and warm, without sounding murky. As you noted, the built in DAC is not just something thrown in to sweeten the pot; it is worthy of this great amp. If one has efficient speakers, the A40 might be powerful enough, but having the A100 means freedom to get any speaker on the market.
Synthesis Amplifiers: One of High End's Best Kept Secrets?
Just stopping by to share my enthusiasm for my new Synthesis A100 Titan integrated amplifier. For the past few years, I have been on the hunt for the best integrated amp I could find in my price range. I've had a Line Magnetic 508ia, a Devialet, a Lyngdorf TDAI-3400, a Boulder 866, a Vitus RI-101 mk2, and a Vitus SIA-025 mk2 in the past four or five years. I enjoyed aspects of each of these amps, some related to sonics, some to functionality, and some to build quality.
And yet, in each case, after several months, I found that I wasn't quite getting the sound I wanted--rich, three-dimensional. engaging, and dynamic without being fatiguing. Too often, I found myself picking the sonic picture apart, assessing this or that at the expense of pure musical enjoyment.
I finally decided to give up on my hunt for the "perfect" solid state solution and go back to tubes, which led me to audition the Synthesis A100 Titan, an amp that features an octet of KT66 tubes, a pair of 12AX7, a pair of 12BH7, and even an onboard DAC. I was intrigued by this amp, but found very, very little written about it in the audio forums (here and elsewhere), except the praise of a couple of folks.
I've had it about a month now, so while I cannot give a guarantee that it is my "lifetime amp" in light of my history of amp promiscuity, I can say with absolute assurance that I find this amp far more satisfying and exciting than any of the amps I've had through here over the past few years.
In short, I am just astonished by it. I had assumed that at the very least, the onboard DAC would be inferior to my Lampizator Baltic 3, which is just wonderful in every respect, but as I spend more time comparing, I am not even sure of that anymore. The onboard DAC is so good that I am now planning to try some different USB cables to see how much performance can be squeezed out of it. Very possibly, my excellent Lampi may soon be up for sale.
Just to be clear, this is no ad, and I have no affiliation whatsoever with any dealer or distributor. I just can't believe how good this amp is, and how relatively unheralded it is. So I am heralding. The Titan is a pure pleasure to listen through every night, and a magical match with my Fyne speakers. The presentation is utterly immersive, and spellbinding. I am no longer picking the sound apart. There's no need.
If you are in the market, I highly recommend an audition.
72 responses Add your response
I am sure I would have been fine with the A40, as the Fynes are quiet efficient, but it is great to have the power to spare. The amp is not necessarily inexpensive, but let's just say I was able to pull thousands of dollars out of my system by selling my last amp and buying the Titan. I'll recoup thousands more if I decide to sell my DAC and interconnects. That makes the Synthesis an unbelievable bargain in my book. |
I had the A40 in my system for a long time and absolutely loved it, the A100 was out of my price range at the time. The DAC model is the same in both and is amazing. I just upgraded to Synthesis Roma 98 DC mono blocks and the Roma 117DC pre-amp and my system has gone to another level. Luigi builds some fantastic equipment. |
The new amp and linestage are terrific sounding components. Like the A100s, a local dealer has had quite a few "shocking" trade-ins of very expensive gear for these items based on the sound. Off hand, I cannot think of commercial, non-custom made amps that I prefer over the separates or the A100. Synthesis has some very upscale, extremely large amps in the "Metropolis" line that I've heard which are very good amps. Yes, these are even better, particularly if one needs a lot of power, but, I like the more compact form of the new separates, the A100 and the A40. They have a cheaper integrated with built in DAC and phono stage that is no slouch too, but, I like the above-mentioned gear because they are built into large enough chassis that make long-term damage from heat less of an issue. |
Thanks for all who have chimed in, those who have also had thrilling experiences with the Synthesis gear and those with very kind and supportive comments. I have always appreciated this about our community, our shared enthusiasm for good sound and fun discoveries. I forgot to mention that the stock TAD KT66 tubes are sounding just terrific to me, though I did swap out the smaller Electro Harmonix tubes and for some NOS tubes I had lying around and experienced a nice litte jump in performance. I often find myself impressed by great solid state and class D amps, but invariably I migrate back to tubes. I guess they must be worth the trouble, for me at least. And, yes, I sure do like looking at them, especially at night in the dark, when my system becomes a little cathedral of sound and beauty. |
I just believe that at the end of day if executed properly, tube amplification and circuits are more natural sounding and thus more engaging and realistic. Not every tube product successfully pulls this off. Charles |
Chris, you have found a wonderful match to your Fyne 704 speakers and that is everything! The transformers in your amp are a big reason why it sounds so good. They are very special. I admire your dedication to finding the perfect amp for your system and tastes. It often takes effort and you gave it your all!
|
Thanks very much, Bill. It really has been somewhat of an odyssey, but I had some fun along the way and got to sample a wide swath of great-sounding amps, while at the same time coming to terms with exactly the kind of sound I was looking for. I forgot to mention a dalliance with the Linear Tube Audio Ultralinear+, another very fine amp indeed but, once again, not exactly right for me. I would love to get together sometime and hear the Synthesis and Circle Labs in the same system. That would be great fun I'm sure. I have an audition this weekend of an Infigo USB cable and also have a Network Acoustics Muon USB cable on the way to compare. If that goes as well as I hope it will and think it may, my DAC will soon be for sale. The Synthesis has changed my paradigm on how good an onboard DAC can be. It has been quite a ride rebuilding my system around the Fynes, but I think at last I am almost there.
|
The Muon USB cable will be very good. Looking forward to hearing which one you keep. I own the Network Acoustics Muon Pro streaming cables and streaming filter.They are outstanding. I have also owned their USB cable. Don’t forget to try an SR Purple fuse in your amplifier. The uptick in sound quality will please you Chris. |
It is great to hear about someone satisfied by a purchase, particularly one that I personally like as well. I know someone who traded in some quite new $70k+ electronics for the new Synthesis separate power amp and linestage which are a step up from the A100, but, not that big a step up. This gear is that good. Of course it doesn't end here. There is always the Fyne F1 series of speakers. I quite like the F1-12S that I heard. It has the kind of lively sound that I look for with less of the sibilant peak in the upper midrange that I hear with their closest competitor (Tannoy). |
The F1-12s are on my radar. A very good deal on a used pair tempted me a few months back, but the timing wasn't good. My wife isn't crazy about their looks either, so there is that to overcome since the system is in our primary living area. At some point down the line, I might consider Synthesis separates, but I expect I'll be enamored with the A100 for quite some time, and I love the simplicity of it. I may take the proceeds from selling my DAC and cables and have some fun exploring some different cartridges. It really never ends. |
I had a very interesting afternoon at the Synthesis dealer in my area. He is someone who believes that amps make a huge difference such that systems with “modest” speakers can sound spectacular with the right amplifier. To prove his point, he had tiny ProAc Tablettes being powered by a Synthesis NYC (part of the Metropolitan series; 4 KT 120’s per channel). It was quite shocking how good was the sound coming from these tiny speakers—rich, powerful, room filling, and punchy. While no one would actually go with such a match, it certainly proved that most speakers will deliver far more than one can imagine when given the chance. |
@waltersalas - Can you explain what is involved with biasing the tubes; I see that it is manual biasing? . Also, who is your dealer?
Thank you |
It turns out that the biasing situation with the A100 is a bit "mysterious" and complicated. In the specs on the website, it says the amp is "manual" bias for the power tubes, but there is no information otherwise on how or where to adjust the bias. My dealer thought the amp was an autobias design, but that turned out to be incorrect. The tech at Deja Vu Audio--the distributor for Synthesis in the US--told me that the output tubes would need to be biased manually when I change them. He said that most often, the KT66 tubes last about six years. Unfortunately, the Synthesis designer did not make it easy to adjust the bias, so the tech recommended taking the amp to a local repair shop when the KT66 tubes have to be replaced. Not convenient and certainly not ideal, but for me at least, well worth it to own this extraordinary amplifier. If you are especially proficient and knowledgeable, you could probably manage to do this on your own. I'll probably just have my local tech do it when the time comes.
|
Per my email correspondence with Synthesis : - "amps are manual bias except the ROMA96DC and ROMA96DC+ that have autobias" - T"he biasing procedure is internal and need to open the amp for setting" - "The bias setting needs to be done when the tubes are spent, or when put the new. ... need a multi meter for to read the bias value (current) and a little knowledge of electronics." - "if you need a bias setting manual, I’ll send you" |
Given clear instructions, I don't think it is hard for anyone to bias their amp themselves. But, the problem is that it is hard to gage how experienced is the person attempting this, how much experience they have with a multimeter, and there is always a concern that someone might poke a probe where it should not go. I can understand the reluctance to encouraging people to do this on their own. I was at a pet store once where the owner got a call from a customer who just bought an air pump and could not get it to work. The customer lived nearby and brought it back to the store a few minutes later. When she took it out of the plastic bag, water was leaking from the pump. The dealer asked about how she used it. She said she plugged it in and just threw it into the tank. I bet that was not anticipated. |
Yes, the problem is under that bottom cover you have some 400-500vdc at your fingertips and one better know what the heck they are doing. A wrong move and serious injury or death is possible. So this amp is really not bias capable by most folks. If the internal bias points are well away from high voltage and “safe” then ignore my comments. Not sure this is the case however. l strongly suggest the amp maker simply provide bias slots on top of the chassis where one can plug in their multimeter. This is simple to do, not costly, and so needed. Wonderful amp for sure, but this bias issue is a real one. Not my intent to be negative or hyperbolic here, but simply sharing the realities. Hard to find techs in most places nowadays making it a hassle to bias when needed. I have to think this could be addressed and rather easily. |
It is highly unlikely I will do this myself. Then again, the tech for Deja Vu told me that the KT66 tubes in the Synthesis last an average of six years. I'm not exactly fretting over it. I have a tech twenty minutes up the road who could do it, or I might send it to Virginia to have them do it when the time comes for tube replacement. For context, I just sold an amp that retails for more than twice as much as the A100. If I also end up selling the DAC, interconnects, and digital cable as seems very likely given the quality of the onboard DAC in the unit, I will be pulling about $10K out of the system and still have sound I much (much!) prefer. For me at least, that's worth the nuisance of having someone else setting the bias on the output tubes when the time comes for that. Your mileage, as they say, may vary.
|
I get it for sure, Bill. This "quirky" design flaw could well be a non-starter for many, and I certainly wish they'd make exactly the adjustment to their amps you have suggested. I will send this advice along directly to Synthesis, for whatever good that might do. All I can say to anyone out there is don't audition it unless you're willing to live with it :)
|
I purchased the Synthesis A40 to power my Dali Epicon 2 monitors. When I got home I connected the A40 to my primary system consisting of Franco Serblin Ktemas. Needless to say, the amp never left the primary system and now powers my Ktemas. Plenty of power. I mainly listen to vinyl through it, but when I compared the internal DAC to the Accuphase DC-37, well I prefer the Accuphase. With this said, if needed, I would be happy with the A40 DAC. I also purchased Audio Note speaker cables to go with it. Good combo. I listen to my Accuphase setup mostly, but for listening sessions with the right music I switch on the Synthesis. I am happy with the purchase. Glad to hear others are well. Sounds like we purchased from same dealer in NOVA |
I’ve had my A100T for about 6 months and love it. Powering Audio Note AN/E Lexus HE Signature speakers which I bought at the same place brings exception listening experience. My favorite part is actually the no sound, the air between a singers’ breadth. All of this system was recommended after my dealer, demo’s at my request, Conrad Johnson mono blocks. The A100T killed it. My dealer also recommended a streamer they use to demo various equipment mostly speakers. The Sonos Port. Around $500. And it sounds amazing too. Just for fun, I’m going to demo the AN Soro se signature tomorrow largely because I want to hear how it sounds with AN speakers. I’m sure it will be great but how will it compare to the A100T? We shall see. |
I like the Soro amp a lot, likewise the AN Oto. The comparison should be interesting. I've heard various AN speakers with the A100 and A40, and these amps play very well with AN speakers. Both Synthesis amps will be loafing a bit playing any AN speaker. Don't forget that the Synthesis has a pretty formidable built in DAC. |
I'll be interested in this comparison as well. I continue to marvel at my A100 every day. I'm glad Larry mentioned the onboard DAC again. I have been driving myself crazy for a month comparing it to my Lampizator Baltic 3, which is a terrific DAC that suits my tastes nearly perfectly, and I sometimes think it is enough of an improvement that I'll keep it or even upgrade the Baltic 4. But the A100 DAC sounds so good to me that it really does force me to consider the law of diminishing returns. I've been comparing for a month and the differences are by no means night and day. You throw in the cost of a decent pair of interconnects and an extra power cord, and pretty soon you're closing in on $10k for what, maybe a 5-10 percent improvement? The fact that this is even a horse race speaks volumes. Maybe other Synthesis owners are experiencing a bigger gap in performance than I seem to be between their external DAC and Synthesis' own built in DAC, but when Larry says it's formidable, that's no joke. I've had several very highly regarded integrated amps with built-in DACs, and not one of them impressed me the way this one has.
|
The LampiZator Baltic 3/4 DAC is highly regarded. Quite a compliment to acknowledge that the built-in Synthesis DAC is toe to toe competitive. I believe that in audio one “generally “ gets what is paid for. However, I’d be the first to admit it’s hardly linear. There are undeniable exceptions and diminishing returns is a very real circumstance. With high end audio you can certainly find on occasion, equal or more for less cost. so I can’t say that I am surprised by this scenario. Charles |
As stated above, I am now an owner of the A40 for about week or so. I am currently listening to the onboard DAC via USB cable from my streamer. Yes, it sounds great with a warm sound signature. In contrast, when I listen to the A40 with my Accuphase D-37 DAC the sound is great as well, but slightly more analytical. On another note, Vu stated they are having problems with the new remotes. I have yet to use mine. He states they may be recalled. Have you heard this as well? |
I have not heard this. Hmm, what kind of problems? The only thing I have noticed with mine is that it can be a little bit balky and the volume control is not as smooth as I would wish. It doesn't really bother me that much, but an upgrade would be welcome. I believe my Lampizator Baltic 3 has a slightly bigger and slightly more layered soundstage, but otherwise they sound more alike than different. |
I genuinely believe that with audio/music , just trust your ears. Whichever component you gravitate toward naturally is the right choice for you. Charles |
When I have time later in the week, I'll call about the remote. Believe me, I know what you mean about going to back to solid state. I had some very nice, very highly regarded solid state amps through here the past couple of years, but I much prefer the Synthesis A100 to any of them. It is very hard to turn it out and go to bed at night, always a good sign!
|
Well, before I jump off the A-70 bandwagon, I just upgraded to the Audio Note Lexus cable and it made a huge difference in the solid state amp from the previous AN cable. The AN-LA cable sounded fine with the synthesis, but did not sound good with the Accuphase. Now, I can say both amps are equal in its value to the overall system.
|
Hi all! I agree with you about the Synthesis gear. I bought a combination: an older Synthesis Harmony, two Sythesis The Theatre monoblocks and the Synthesis CD player. I liked the way it looked. When I got home and attached it for fun in the dining room to an old set of Rogers Studio 1 loudspeakers I was a stunned at how good it sounded! I used a simple, but very good Topping D70S DAC. So my experience with Synthesis is indeed a good one! I am now in the process to find the best set of matched tubes to place in these pre/power combo. I do the matching of the tubes on a calibrated AVO MKIII tube tester and the biasing should not be a big problem. What I wanted to let you know: I own quite a lot of gear and I like to try a lot. My tip: try to find a USB bridge for your "older" DAC. ;o) What I am using for a long time is a VTL Reference DAC. You know maybe... the one with the two Ultra Analog DAC's in there and with tubes form 1990. I purchased a USB bridge X-SPDIF 2 from Matrix Audio to cleanup the USB signal and this changed my whole DAC/streaming experience. It merges the old world with the new world. I am now streaming from a specially powered HPE SFF Z240 workstation (NVMe based) through the Matrix Audio X-SPDIF 2 to the VTL Reference DAC. Maybe you have tried allready, but you might try a X-SPDIF 2 in front of your Lampizator?
|
My cable evaluation is on hold until the arrival of my new DAC, the Lampizator Baltic 4.I expect it to arrive in the next week or so, and then we'll see how it shakes out. I will also be comparing a couple of very nice AES/EBU cables--an Infigo prototype and a Shunyata Sigma V2. I will report back when I have some solid impressions. Thanks for your interest. |