Sumiko Blackbird Cartridge


I have a Sumiko Blackbird cartridge that is not working. This happened after a routine stylus cleaning. The repair shop says it is dead. I am out quite a bit of money on this and want to know the best way to recoup any expense possible. Do I list it here as not working, usable for trade or retip? Any advise will be appreciated.
sthinnes

Showing 3 responses by sthinnes

Here's what happened. I always use a magnifying visor to do any detail work. I was looking at the stylus as I carefully
cleaned it and noticed what looked like a small hair clinging to the cartridge body. I used some tweezers to touch it and possibly remove it. Immediately, both channels went out. That's all it took! I did a forum search and read several similar accounts of others having the exact same kind of experience. It wasn't a "hair" or any other foreign body. It was a wire that appeared after a couple of year's use. So, whatever you do, if something appears that looks as if it needs to be removed, LEAVE IT ALONE!!! Other than cleaning the stylus, don't unnecessarily touch any other part of the cartridge. Also, you can't replace a stylus on a Blackbird so be very careful with that as well.
First of all, Sumiko does not do repairs on cartridges. Once the warranty is up, the best they can do is give a discount on a new one. My current cost would be $900.00 and return my old cartridge. I am not going to spend another dime on a cartridge that is so vulnerable with it's "open body" style. A retip with Soundsmith would cost over $300.00 and quite frankly, this cartridge is not worth further investment; and "What on Earth does that mean?" Well Doug, since you asked so nicely...
I didn't feel the need to go into great detail but here's what what happened. I always use a magnifying visor to do any detail work. I was looking at the stylus as I carefully
cleaned it and noticed what looked like a small hair clinging to the cartridge body. I used some tweezers to touch it and possibly remove it. Immediately, both channels went out on the cartridge. That's all it took. I did a forum search and read several similar accounts of others having the exact same kind of experience with a Blackbird. It wasn't a "hair" or any other foreign body. It was a wire that appeared after using the cartridge for a couple of years. Despite your opinion, I can be honest and list it as "not working" and still get something for it. It can possibly be retipped or used as trade for a discount on a new BB.
First of all, Sumiko does not do repairs on cartridges. Once the warranty is up, the best they can do is give a discount on a new one. My current cost would be $900.00 and return my old cartridge. I am not going to spend another dime on a cartridge that is so vulnerable with it's "open body" style. A retip with Soundsmith would cost over $300.00 and quite frankly, this cartridge is not worth further investment; and "What on Earth does that mean?" Well Doug, since you asked so nicely...
I didn't feel the need to go into great detail but here's what what happened. I always use a magnifying visor to do any detail work. I was looking at the stylus as I carefully
cleaned it and noticed what looked like a small hair clinging to the cartridge body. I used some tweezers to touch it and possibly remove it. Immediately, both channels went out on the cartridge. That's all it took. I did a forum search and read several similar accounts of others having the exact same kind of experience with a Blackbird. It wasn't a "hair" or any other foreign body. It was a wire that appeared after using the cartridge for a couple of years. Despite your opinion, I can be honest and list it as "not working" and still get something for it. It can possibly be retipped or used as trade for a discount on a new BB.