You need a preamp with a good output to drive a long cable. I'd recommend pro gear - for example the DAC1 HDR. Most pro preamps will have a more powerful output stage than the consumer equivalents and are better able to handle the higher capacitance...
Suggestions on a balanced preamp?
My electronics are currently 60 feet from my speakers (as measured by speaker cable length). I was thinking of getting a balanced preamp (a Linn2250), sticking it between the speakers, and running balanced lines from the preamp->amp.
Currently I have an onkyo integrated home theater (fairly new, $1000ish retail, don't know which one) HD reciever with RCA out. I also have vandersteen quatros and linn preamp/amp with RCA connections. I was thinking of getting a preamp with RCA in and balanced outputs and running the HD reciever into an AUX input of the preamp and balanced from preamp to amp.
When playing CDs, I would just go CD->pre->amp and not include the HD receiver.
First, does all that sound reasonable?
Second, is there a reasonably priced (1-1.5k) preamp that would work, that includes a remote for volume? I suppose if it didn't include a remote, I could run the CD->HD receiver->pre->amp but that seems like it wouldn't be as optimal, especially because I have a cheapish integrated HD receiver. I figure the HD standards keep evolving so better to spend the money on quality amps/preamps that I keep forever.
Third, is there some collective wisdom that would steer me in a different direction?
Thanks for reading this far,
- Sprangle
Currently I have an onkyo integrated home theater (fairly new, $1000ish retail, don't know which one) HD reciever with RCA out. I also have vandersteen quatros and linn preamp/amp with RCA connections. I was thinking of getting a preamp with RCA in and balanced outputs and running the HD reciever into an AUX input of the preamp and balanced from preamp to amp.
When playing CDs, I would just go CD->pre->amp and not include the HD receiver.
First, does all that sound reasonable?
Second, is there a reasonably priced (1-1.5k) preamp that would work, that includes a remote for volume? I suppose if it didn't include a remote, I could run the CD->HD receiver->pre->amp but that seems like it wouldn't be as optimal, especially because I have a cheapish integrated HD receiver. I figure the HD standards keep evolving so better to spend the money on quality amps/preamps that I keep forever.
Third, is there some collective wisdom that would steer me in a different direction?
Thanks for reading this far,
- Sprangle