Stylus not tracking and sounds terrible


I haven't used my TT in about 6 months due to a remodeling project. The TT was not moved, just not used. Yesterday I fired it up, tried to play some new vinyl, and ran into a problem.

The sound is terrible, shrill and scratchy sounding with no bass. The stylus randomly skates and hops. I tried playing a couple of records I know sound great but the problem remained.

The VTF, VTA, and azimuth are set correctly. I swapped out cables to and from the TT to the phono amp but still have the problem. I tried balanced and single ended cables to my pre from the phono pre.

I tried increasing VTF, playing with the VTA, disconnecting my subs, nothing changed.

The TT is a VPI Aries 1, Benz-Micro LO cartridge, Pass Aleph Ono pre. I've owned all of them since new or almost new so it all has some years on it but it sounded great before. Could the cartridge go bad in 6 months by just sitting there unused?

I had a similar problem a while ago and determined it was vibration/resonance from my room. I have the Aries sitting on a Ginko cloud platform now and it is pretty well isolated.

Everything sounded great the last time I played music on it. The only thing that changed was the location of the phono pre. It used to sit next to the TT but now my ARC amp is in that place. Could the tube amp be doing something here? The TT is right next to it on the same shelf.

Any help or ideas would be greatly appreciated.
nolacap
All these years I thought it was a motor. Until I married my Canadian wife I thought eavestroughs were gutters.
The term 'transducer' got into music reproduction parlance from piezoelectric ceramic cartridges.
GRG, A phono cartridge is a "reverse motor", in the sense that it converts the physical motion of the cantilever into electrical energy.  A motor takes electrical energy and converts it to physical motion.  That's the way in which the two can be viewed as opposites. If you don't like it, don't use it. I really could not care less, and I do not think anyone was confused by referring to the "motor".

"Transducer" is also a perfectly valid description of a phono cartridge; it takes one form of energy and converts it to another.  If you don't agree, then don't use the term.  A loudspeaker is also a transducer.  So is a microphone. Can you get off it, now?
I think I understand phono cartridges and the words I use at least as well as you do.