This is Dale Humphrey, with Star Sound. Everything is fine and in fact the company is entering a new phase of growth and product development. In addition there will be a rebranding to Soundstage Audio - Design & Manufacturing. One of the most significant developments has been the formation of an in-house machine shop. Those familiar with our products understand our intense focus on quality and continual refinement. The manufacturing partners we have utilized have been, generally, reliable and attentive but we had to step-up another level in terms of turnaround times and quality control.
On the product side we introduced, at Capital Audio Fest (check out the reviews), a new line of stands/racks manufactured, primarily, of wood. This is a materially that we have purposely avoided although after repeated requests from the market we began to investigate how we could combine the appeal of wood with our historic emphasis on vibration management - which we control through metals, proprietary shaping, etc. WE ARE NOT A FURNITURE COMPANY! For us to produce anything that interfaces with electronics, speakers and acoustics it must have a beneficial impact and audible results. The Timbre Platforms use 2" thick cherry and pure copper rods and inlays for resonance flow and ultimately grounding. Our new website is under development and you can view one of the racks at: https://soundstageaudio.com. Note:the primary Star Sound site is still active and the product set supported. There is no intention of moving away from our steel and brass product line and still consider those the most effective devices in the respective product category. In that regard we will be launching a new product line called Listening Session which will borrow from our higher-end devices although at lower price points.
garebear: we have your spike and will address your needs. We were baffled at the thread which was ultimately determined to be M14 - 1.5. Please excuse the delay in Robert's response. He has encountered some challenges but myself and others can assist. 6083453253
As a final note check-out my virtual system for a look at our Energy Room. Thank you for your time and consideration.
On the product side we introduced, at Capital Audio Fest (check out the reviews), a new line of stands/racks manufactured, primarily, of wood. This is a materially that we have purposely avoided although after repeated requests from the market we began to investigate how we could combine the appeal of wood with our historic emphasis on vibration management - which we control through metals, proprietary shaping, etc. WE ARE NOT A FURNITURE COMPANY! For us to produce anything that interfaces with electronics, speakers and acoustics it must have a beneficial impact and audible results. The Timbre Platforms use 2" thick cherry and pure copper rods and inlays for resonance flow and ultimately grounding. Our new website is under development and you can view one of the racks at: https://soundstageaudio.com. Note:the primary Star Sound site is still active and the product set supported. There is no intention of moving away from our steel and brass product line and still consider those the most effective devices in the respective product category. In that regard we will be launching a new product line called Listening Session which will borrow from our higher-end devices although at lower price points.
garebear: we have your spike and will address your needs. We were baffled at the thread which was ultimately determined to be M14 - 1.5. Please excuse the delay in Robert's response. He has encountered some challenges but myself and others can assist. 6083453253
As a final note check-out my virtual system for a look at our Energy Room. Thank you for your time and consideration.