Speakers for the real world. Placement problems.


I am currently looking to get a speaker in the mid-tower region with nothing smaller than a 10" woofer even Dual 10" is better.
Must produce big soundstage and Low Freq.BASS on their own and Have the battle tank build quality. Cannot get away with any subwoofers at this point so that is why those attributes are very important and the most Important is VERY FORGIVING ON ROOM PLACEMENT!!! They will be in a 14' x 18' Space and several little obstacles with door placements and what not. So I kind of have to throw the 1/3 rules in stereo imaging out the window(pun intended). Goal is filling the room with good full sound. I guess a pretty efficient speaker would be a fine idea, maybe 92db and above. $2000 used is the limit. Currently running the Odyssey amp 150watt per channnel and an Audio research pure tube pre-amp 1960's amperex tubes, all equipment and cables built within the last 5 years. I'm not too interested in the Ear bleeders like cheaper Klipsch I prefer big power and sound with very smooth midrange and highs even at higher power levels. Mostly Rock and Pink floyd
big stadium kind of stuff listened to ALMOST always on VINYL. Thanks Guys and Girls!
matrix

Showing 4 responses by unsound

Perhaps you could tell us where you would like to place your speakers relative to to your room and listening position?
Really tough requirements considering price point and existing equipment. The Dunlavys almost meet your requirements, but are probably out of your price point, besides as much as I like your amp the impedance load might be challenging. The only other speakers that comes to mind are Thiels. Again the impedance load is an issue, and they are not nearly as efficient, but you might be able to find something at your price point. May I suggest leaving money in your budget for some room treatment?
Matrix, you are right on about perfection at any price and at some point you just have to do it. Sometimes one adjustment does lead to another in order to get the synergy you so rightly speak of. Re: the impedance load. Most Thiels don't go above 4 Ohms (they are also very stable). The Dunlavys drop to 3.5 Ohms (they are almost as stable as the Thiels). I believe your amp goes from 150 watts into 8 Ohms to 260 watts into 4 Ohms. Now numbers by themselves are not the end all to end all, but even Thiel recommends that a good starting point is to find an amp that can double down from 8 Ohms to 4 Ohms and better yet to 2 Ohms. I would suggest trying your amp with these type of speakers before buying. I have heard your amp on a few different systems (never at great length!) and the systems they were in always sounded quite nice. Damned, if I could remeber the rest of the associated equipment. I'll keep thinking about what might work for you, as I feel for your situation. I think you are going about it the right way. Good luck and keep us informed.