Speaker Isolation -- Experience with Townshend Seismic Isolation Podiums


Over the past several months the new Townshend Seismic Isolation Podiums have been receiving some interesting and positive press. Living as I do in both an earthquake zone (Pacific NW) and in a busy urban setting with a lot of rumble from construction and passing vehicles I thought these could be worth exploring for my setup. As I was not able to find a US distributor I purchase direct from the UK (via Analogue Seduction, highly recommended). I placed an online order, with follow up to confirm the size and weight of my speakers and about six weeks later they turned up on my doorstep (the platforms are made to order with loading on the cells specific to the weight of your speakers)

The Isolation Podiums are basically four load cells attached to a robust platform onto which you stand your speakers. While not cheap ($2500 for the size I needed) they are very well designed and easy to use. For example I was concerned about being able to move my 275lb Magico Q3s up onto the platforms -- actually it was easy as the platform at 20mm is lower than the speaker spikes so it was simply a matter of unscrewing each spike and shuffling the speaker across. Once onto the platforms fine leveling was easily possible by adjusting each load cell. All in all the podium system is very well designed and works exactly as intended.

But how does it sound? With several days listening experience I cannot recommend this product too highly for anyone who wants to hear the best from their speakers. My room is custom designed with a concrete slab floor so a solid surface but of course subject to external vibration. Prior to the podiums I'd been enjoying deep and dynamic bass but had occasionally felt that the sound became congested in more dynamic and complex material. With the podiums all of this clears up. First impression may be of less bass but as is typically the case this was a result of a reduction in boom and smear and instead more of the open sound of real bass (think of a bass drum as being more "whoof" than "thump" after the initial leading edge - too often the sense of large volumes of air being displaced is lost. In addition I became much more aware of all the rhythmic leading edge detail in bass guitar passages, all the little cues the bassist is putting in. Furthermore it became much easier to resolve bass alongside other instruments. Example in point "Bye Bye Blackbird" by Nancy Harms (https://www.youtube.com/watch?v=yd4tQrndlFw). This opens with deep full bass which is a first test but then quickly becomes quite a crowded and in many systems overloaded mix. With the podium in place all of the instruments became much easier to separate and what had been a congested and even edgy mix became clear.

One final and unexpected change is how you can now more easily hear the recording venue. Listening at the start of recordings the sound of the room itself is a very low level mix of rumbles which (when it's present on the recording) is all too easy to lose -- the podiums help uncover this detail and create a much greater sense of real instruments in space. All in all I'd recommend you give these a try and no need to believe in voodoo to buy in to this tweak.
128x128folkfreak

Showing 7 responses by shaizada

FolkFreak, the US Distributor for Townshend Products is Dan Meinwald. Here is his website:
http://www.ear-usa.com/

I’ve been contemplating the use of the Townshend Speaker Podiums as well for my Marten Bird 2 loudspeakers (Might be switching to Marten Coltrane Tenors soon.  If that happens, I might order them for THAT speaker).

Nice turntable! I have one on order. Planning to run a Helius Silver Ruby Tonearm, a Kuzma 4 point and a Schroder Reference on a detached arm pod I had custom made for it.
I should probably update this thread.

I did end up moving to the Marten Coltrane Tenors speakers (from the Marten Bird 2), and am considering maybe loading them up on Townshend Podiums next. Right now, I have my whole Stillpoints ESS equipment rack on weight matched Townshend Dual Pods per corner for a total of 8 pods. Also setup my EAR 890 monoblocks on Townshend Seismic platforms that were custom cut to fit the amps.

Finally, the EAR Discmaster is on the top of the Stillpoints ESS rack and totally disconnected from the floor vibrations now. Got an increase in black background and dynamic range, but more importantly, no speaker vibrations feeding back into the setup.

Also, apart from the Helius Silver Ruby, I have the Kuzma 4 point also loaded up on the Discmaster.  Luckily, I was able to use properly matched springs within the Discmaster pods that balanced out the whole turntable.  I leveled the whole affair and it sings beautifully! Here is a picture:

https://c3.staticflickr.com/6/5593/30252622330_f0d25cb15f_b.jpg
Hello folks!

I'm going to experiment with the Seismic speaker podiums as well.  I was wondering if anyone has thought about the speaker weight distribution?

My speaker cabinets (Marten Coltrane Tenors) are full carbon fiber (so they are very light overall), but the front baffle is wood and all the drivers are mounted there.  This makes the speaker front heavy.  The speakers are 86.6 lbs each.  Do you guys think it might be fine to go with 2 green dot springs in the back (min weight 17 lb, max weight, 35 lb per spring) and 2 blue dot springs (min. weight 35lb, max weight, 75 lb).  Or shall I stay with all green dot springs?
Isoacoustics Gaia are also an excellent product that works really really well.  If I didn’t already have Townshend Audio platforms, I would have seriously considered Isoacoustics.

It is really great to find products that truly work as advertised and even better than expectations.
Hi @david_ten 

You should buy the platform instead of the speaker bars.  My speakers are also bottom ported with a tilt backwards.  

Your speaker has spikes and rubber stops. The Townshend platform will help to retain that exact same spec.  You can spike directly into the platform.  

Just make sure you get an appropriately sized platform for your speaker.

The platform is really effective! Beautiful, cohesive sound.
You are welcome.  Yes, the platforms are solid steel I think.  They will easily handle your speaker load.  The corner pods are rated for different weights. When you order, make sure your speaker weight falls within the range of pod that is ordered.  

Mine are are green dots. 

Your dealer will help you with that.