Speaker Cable Lengths - W/ Monos


I'm considering having the manufacturer of my 10 foot cables cut the cables in half and re-terminate them for use with my Monoblocks in a Bi-wire configuration. They are very expensive cables, however, and I'd hate to cut myself short on cable (while also ruining their resale). At the same time, I'd hate to double up the longer length due to costs if I can help it.

My short term listening room will work easily with 4 1/2 to 5 foot cables, however, I'm not sure about a future room I'm planning.

What are typical cable lengths for those of you running monos out there? Is five feet usually enough? How far away from my speakers should my 150 lb. monos be?

Thanks in advance for any assistance.
audiopman

Showing 1 response by nemo

Long interconnects and very short loudspeaker cables sound better than short interconnects and long speaker cables in VERY close to 100% of "all cases"! - and it's not too difficult to explain why: interconencts are
voltage-driven" (almost no current) and there is practically no signal quality degradation in properly made interconencts, but loudspeaker cables carry very considerable current, so there is definitely a signal degradation in long speaker cables - which was confirmed by numerous listening tests on many different systems.