Go get a pack of Roxol/rockwool for $50. I like the packs that are 12 slabs of 3.5 inch thick panels 47 inches tall by 15 wide. That’s enough to diagnose room problems. Stand some in the corners, then lay some along the base of the wall behind the speakers, maybe stand some up on the wall behind each speaker, then try at the first reflection points. Try other locations and combinations. When you notice it changes the sound, that’s an area that you need to work on with real room treatments. Don’t spend money guessing what treatments you need and where. $50 bucks and a weekend of experimenting with rockwool will lead you to know your room better. Yes there are more scientific methods. This is one method everyone can do. I’ve used these rockwool slabs to help many people find room problems.
Sound quality vs. volume
Looking for a bit of expertise here:
I recently made a few changes to my setup and while overall pleased with the results, I’m on the quest for better. I’m hoping you all can help me diagnose an issue I’m hearing.
When listening to music at lower volume levels - say less than 1/2 total volume, the clarity, imaging and dynamics come across far more coherent and “in focus”. To use an often over-coined phrase “It’s like I’m there in the room”. As I start to push the volume up a bit, closer to live-performance levels, the sound becomes increasingly “mushy”. I know, a highly technical term, but the best way to describe what I am hearing. The bottom-end loosens up - getting a bit boomy, the crispness of the mid-range and highs fade and the imaging falls out of focus. These are all incremental with volume until I get to the point where it’s just unbearable.
I’m no expert by any means but feel it might be room acoustics. I already know I have a less than ideal setup with a nearly square room (21x20ft) with 60% of the surface covered with clear birch wood paneling. Some things we can’t change (easily). I do not have any acoustic treatment, just lots of soft furniture. What I find interesting is that my old setup (Magnepan 1.6) didn’t suffer to such a degree. Maybe with the new setup there is more to loose? A mystery.
For a bit more context:
Speakers: Dynaudio Contour 60
Streamer: SoTM sms-200 Ultra
Amplifier: Peachtree Nova500
Within the 20x21ft. room, my speakers are 4ft. from the wall, I am seated 13ft. from the front wall (a bit back from room center). Speakers are 9ft. apart.
Any thoughts?
I recently made a few changes to my setup and while overall pleased with the results, I’m on the quest for better. I’m hoping you all can help me diagnose an issue I’m hearing.
When listening to music at lower volume levels - say less than 1/2 total volume, the clarity, imaging and dynamics come across far more coherent and “in focus”. To use an often over-coined phrase “It’s like I’m there in the room”. As I start to push the volume up a bit, closer to live-performance levels, the sound becomes increasingly “mushy”. I know, a highly technical term, but the best way to describe what I am hearing. The bottom-end loosens up - getting a bit boomy, the crispness of the mid-range and highs fade and the imaging falls out of focus. These are all incremental with volume until I get to the point where it’s just unbearable.
I’m no expert by any means but feel it might be room acoustics. I already know I have a less than ideal setup with a nearly square room (21x20ft) with 60% of the surface covered with clear birch wood paneling. Some things we can’t change (easily). I do not have any acoustic treatment, just lots of soft furniture. What I find interesting is that my old setup (Magnepan 1.6) didn’t suffer to such a degree. Maybe with the new setup there is more to loose? A mystery.
For a bit more context:
Speakers: Dynaudio Contour 60
Streamer: SoTM sms-200 Ultra
Amplifier: Peachtree Nova500
Within the 20x21ft. room, my speakers are 4ft. from the wall, I am seated 13ft. from the front wall (a bit back from room center). Speakers are 9ft. apart.
Any thoughts?