Sick and tired of hum-please read


JBL 4345's
Canary 500 monoblocks using emission lab 300B tubes
PS Audio MK ll Dac
Dish Network VIP 612 DVR
Dedicated 120 line from panel

You name it, I've tried it. I have a low level 60hz hum that I for some crazy reason am unable to get rid of.

Lifting the ground, power re-generators, cable changes, equipment to equipment grounding, Satellite new cable and grounding and turning off the whole house except my music room has not resolved. The only explanation I can conclude is that 300B tube amps and very high efficiency speakers will always produce hum. Drives me crazy. This subject has been beaten to death but if any of you guys has any out of the box ideas other than the obvious, I would be interested to hear. Thank you in advance
invstbiker

Showing 1 response by pbnaudio

You have efficient speakers so there may be some residual hum from your Canary Amps ( I have a set of REF2) that you cannot eliminate. Start from the very end ie. connect speakers to amps, short the inputs with shorting plugs and turn them on, the level of hum you have at this point is your base level. Then work your way forward, connect the DAC to the amps if hum increases or appears you have to look at how equipment is grounded. You mention that you have dedicated circuit (s) to you system - if two circuits one from each leg of the feed to your house, this is a certain way to introduce hum in your system.

Best of luck

Peter