Should I upgrade home theatre to one with HDMI?


Hello - I was wondering if someone could give me some advice. I have a Denon 5.1 channel amp and pre amp that does not have an HDMI input. I recently got a plasma TV and wanted to hook up the home theatre setup, but was dismayed to find that the input and outputs on the directtv receiver don't correlate with the inputs and outputs on the Denon. Currently the television is connected only to the directtv receiver with the HDMI cable; i.e. only sound coming from the television. Is it time for an upgrade to a receiver with HDMI inputs and pass through or can I still get high def television and quality audio with an optical video feed and a coaxial digital audio feed? Any help or advice would be appreciated. Thanks, KMW
kmw614214

Showing 5 responses by admranger

Not to pile on, but my Rotel 1056 receiver has me in the same boat, no HDMI inputs/outputs.

I've done what others have suggested and used it for some time now.

TV-Directv box hdmi to tv, tv volume set to zero. Digital audio out of Directv box to receiver.

DVD-Oppo 95 hdmi to tv, 5.1 analog direct to receiver which lets the Oppo deal with the new codecs and the receiver sends the signal unmolested to the amp section.

CD-Oppo 95 2-channel analog out to cd analog input on the receiver. Lets the nice DACs in the Oppo handle the signal.

Hope that helps.
"Admnranger have you chosen the DACS of the Oppo over the Room management and DACS of your Rotel by ear?"

No I have not. My Rotel doesn't handle the new codecs on the blu-rays so I let the Oppo do the heavy lifting.

For cd's, I let the Sabre chipset in the Oppo again do all the work. I can't image that the 2005? era DACs in the Rotel receiver are going to trump the ones in the BDP-95 Oppo, but I could be wrong. Are you suggesting that they are better or will sound better with my setup, Tcatman?

I let the Rotel handle the processing for the ipod output coming out of my Wadia i170 and the DirecTV HD DVR. Otherwise, the Oppo does the DAC work for me.
Tcatman: Sorry, I may still not understand, but I'll give it a shot.

I don't like what the Rotel does taking 2-channel input and running it through it's DSP for 5.1 sound. If I didn't have small front speakers, I'd run 2 channel bypass but I have to add in the .1 as my speakers roll off once you are in the 60-ish hertz range.

My room is definitely not optimized nor will it be barring personal tragedy or divorce (for me it is one in the same). The Rotel room management doesn't exist. I don't have any automatic room management/sound correcting software working (maybe I'm misunderstanding what you are getting at).

Bass management is done by ear. I've now had my subs in 3 different spots in the past month. I think I'm getting close to liking where they are.

I don't have any SACDs. So high resolution formats are HDCDs and blu-ray concert dvds. I don't even like some of the DTS audio cds I have (Henley's "End of the Innocence" for instance). They are muddy and meh to me. I prefer the regular CD hands down in this particular instance. Adele at Royal Albert Hall blu-ray, in stark contrast, is stunning in DTS 5.1.
Sorry for the multiquote fail, but I can't seem to do any formatting of text so I'll do my best to separate comments from responses.

>Tcatman wrote: What I don't understand is how you manage the bass using your 2 channel (dual sabre DACS) outputs going pure direct to your Rotel amps for Music CDs ...
++++++++++++++++++++++++++++

I think you are on to something here, Tcatman. I'm looking into just running through the multi-input on the Rotel as I think I can have the Oppo send 2.1 through that route. It would eliminate 2 RCA cables in my system. If I'm not mistaken, I can run the front mains through the stereo out of the OPPO and the center, surrounds, and the .1 LFE from the 5.1/7.1 analog outs. I'll have to break down and violate my engineering background and (re) read the manual...
++++++++++++++++++++++++++++

>Tcatman wrote: I am surprised that the Rotel is flexible enough to pass the 5.1 analog blue ray through to the amp AND have the CD inputs also bypass the digital stage and go pure direct to the amps.
++++++++++++++++++++++++++++++

I can do 2 channel bypass, but then I don't have any .1 LFE. Made that mistake already. I've been running the 2 channel w/LFE, using the Rotel bass management to crossover at 80 hz. This may be a huge mistake on my part so I need to RTFM, as I stated above.
+++++++++++++++++++++++++++

>Tcatman wrote: So... I understand that you are at step one...
++++++++++++++++++++++

That's two steps ahead of where I started thanks to thoughtful responses from Audiogon posters like yourself.
++++++++++++++++++++++++

>Tcatman wrote: Optimize the acoustics of your current speakers and subs in 5.1 mode. You are now trying to manage the acoustics of your room with a major WAF constraint..
+++++++++++++++++++++++++++++

Ahhh yes, the WAF. Subs were moved again this weekend over WAF issues...I'm still in the denial stage of grief over this...
++++++++++++++++++++++++++++

>Tcatman wrote: Step two. You will consider different speakers given the size of the room you have and WAF.
++++++++++++++++++++++++++

My room just plain acoustically sucks. I'd love to scoop up the Aerial Acoustic 7B's that are in the consignment section of one of the local high-end shops in town ($1800!), but that's not going to happen right now (my budget has changed due to some unforeseen issues). Of course given my mid-frequency hearling loss I may want to find some speakers that over-emphasize the 4k-12k hz range!
++++++++++++++++++++++++++++

>Tcatman wrote: In parallel with your acoustic experiments... you might consider a PC and JRiver MC with an HDMI output to your Rotel. (splitter for the video hdmi to your TV) You could use the DSP and room management tools of JRiver on the high resolution uncompressed 7.1 formats stored on disk and go to the Rotel DACS. This would allow you to evaluate if more digital processing room correction would improve your already optimized acoustics. (You would not have to purchase a new AV receiver to try the room management solutions)
+++++++++++++++++++++++++++

I'm going to have to do some googling to figure out what these items are and what they do, but it sounds intriguing! My Rotel can't accept an HDMI input though, if that's required.
Thanks Tcatman.

Hopefully this has helped the OP, Kmw614214 too!

I will tackle the recommendations in the near future.

BTW: the JRiver stuff is beyond what I'm looking to do, to be frank, but thanks for pointing out the option. Just one more thing I didn't know before coming to the 'gon.