I've used the A-M systems teflon-coated silver wire in 0.5mm diameter. It's a bear to work with, unless you have excellent vision, but the results are superb. I think the Acrotec would be great, too, but I fear I would not be able to see it well enough to solder it. One slight drawback to the very thin silver wire is that it tends to melt at or near to the same temperature that melts silver solder. You've got to make your solder joints quickly.
RS A1 Labs rewire
I once read a thread here whereby someone had done a rewire on their
RS A1 Labs stock tone arm resulting in an improved sound. I have had this arm
for several years and replaced the stock wire with same from the factory. I have tried but have never found a wire light enough to replace it with for an upgrade
in sound . I also understand that they went from cartridge leads straight to
the pre amp inputs. I would appreciate it if anyone can shed some light on this.
Thanks
RS A1 Labs stock tone arm resulting in an improved sound. I have had this arm
for several years and replaced the stock wire with same from the factory. I have tried but have never found a wire light enough to replace it with for an upgrade
in sound . I also understand that they went from cartridge leads straight to
the pre amp inputs. I would appreciate it if anyone can shed some light on this.
Thanks