Ringing heatsinks


One of my current amplifiers is a Classe' CA300 and while performing a cable swap, I accidently hit the heatsink with my finger nail and it rang like a tuning fork. I tried the same manuever with an older Classe' DR8 amp and it didn't ring like that. Then I wondered what effect this had on the sound of the amp since the transistors are mounted to the other side of the heat sink. I inserted a rolled up towell on either side of the amp between the shelf and the heat sinks and on top of the heat sinks rested some pieces of mdf wood to dampen the ringing. This does not pose a heat problem with the CA300 as the fins run pretty cool. The sonic change is very noticeable eliminating a glare in the treble and a vast improvement in focus through the vocal regions. The overall presentation is smoother and more lifelike. I'd like to hear from anyone else with a CA 300/400 or another brand with ringing heat sinks as to whether they find any improvement in the damping I've suggested.
rhljazz

Showing 1 response by lphunter2

Hi,
If you go to Soundstage.com and look at the review for the Belles Hotrod amp, the reviewer suggests putting rope caulking material on the underside of the fins. I just bought a box at Sears Hardware for $3.50 and am going to try it.