2. cables
  3. 138493-73224

Right Angle Adapters

Okay, I just got my AQ Thunder Power cords today. Though they perform admirably, even at initial install, I am a bit unnerved by just how stiff and unyielding they are. I contacted AQ to ask about using a right angle adapter and was told by a gentleman with a British accent, that sound degradation would be minimal if I used one with continuous metal (ie. no cords).
Can anyone here recommend a good brand. 
I see Voodoo cable offers some, but at near $100, I think there must be some less expensive options.

gdnrbob

Showing 1 response by almarg

almarg's avatar
Ag insider logo xs@2x
almarg
9,670 posts
 
Hi Bob,

I’ve had good results with Audioquest’s own adapters, costing $14.95:

https://www.audioadvisor.com/prodinfo.asp?number=AQICE90

Note that you’ll need to select either the center pin down or the center pin up version of the adapter, depending on the orientation of the IEC connector in the particular component.

Also, be aware that if the component has its center pin up what you must select is the adapter that is referred to as "center pin down," aka IEC90/1, not IEC90/2.  Assuming, that is, that the power cord is to be inserted into the adapter from above.

And if the component has its center pin down, what you must select is the adapter that is referred to as "center pin up," aka IEC90/2.  Assuming, again, that the power cord is to be inserted into the adapter from above.

Been there, done that :-)

Finally, note that the item numbers used by Audio Advisor mistakenly translate Audioquest’s IEC90 model numbers into "ICE90."

Best regards,
-- Al
More to discover