Review: Sony SS-M7aes Speaker


Category: Speakers

Speakers are by far the most subjective piece in the average person's system and the one that tends to create the most excitement, whether positive or negative.
A multitude of evils can be overcome with the right speakers or every fault in the system can be made glaringly obvious. Let the mudslinging begin!
Several years ago I happened to wander into the local audio emporium to see what was new, exciting and due to my budget constraints, affordable. I glanced around at the latest offerings from B&W, Magnapan, and others of their types. Nothing caught my eye but one of their eager young salesmen felt the responsibility to show me the item they were currently trying to unload on unsuspecting customers. Of all things, a Sony speaker!
Being the savvy shopper that I am I would have no part of it. Everyone knows Sony does not make good equipment especially speakers.
Several years later I was in another store and the owner tried the same thing with the same speakers. On this occasion I must have had more time because I listened to his pitch and actually listened to the speakers. Much to my surprise they did not sound anywhere near as bad as I thought they would.
The salesman explained that Sony hired a reputable American speaker designer, gave him the checkbook, and told him not to come back till the job was done.
One of the models he developed was the SS-M7es. It was the first model released but in the middle of what would eventually become a three-model set of speakers. The SS-M3 was a two-way bookshelf speaker, and the SS-M9es was a floor standing four (or later a five driver) model which would eventually end up on Stereophile's class A list of recommended components.
The SS-M7es is a three way, three driver, stand-mounted speaker. None of the cabinet walls are parallel which greatly reduces the possibility of standing waves within the cabinet. The cabinet is made of 1" MDF and comes in many finishes.
The crossover is a third order Thiel type. The drivers were made for Sony but I do not know where they came from or who made them. The speakers themselves are made in the USA.
The speakers come with two sets of binding posts to facilitate bi-wiring, or bi-amping. I would like to see better metal binding posts instead of the plastic which comes stock.
The owner of the store offered to let me take them home and listen. Since no one else was in the store at the moment and no one would ever know I was going to listen to Sony speakers I took him up on the offer. How bad could they be, I wondered to myself.
I used them in place of the Focus .7's I had bought about five years earlier. The Focus impressed me with their overall tone and soundstaging. Alas I don't think the Canadian Company is still around.
I did not expect the Sony’s to compare very well with the Focus speakers, but since installing the Sony’s they have not been out of my system. Everything the Focus speakers did well, the Sony’s did better. Overall tone was as good as what I had been hearing and the soundstage was much tighter and better defined. The treble was audible to my ears to about 14 kHz, but Sony claim’s to go all the way to 20 kHz. Not that it matters to be since I can’t hear it anyway.
When playing LPs I have noticed on many occasions that there was sound coming from outside the spread of the speakers. The soundstage is much wider than the speaker placement. I know some think this is impossible, but I have heard it, as have others. The soundstage is also taller than the speakers are. One of the most pleasant improvements was the front-to-back depth of the soundstage. There is a palpable image presented in front of the listener. Instruments are tightly defined and located within that soundstage. Sound emanates from both the front of the speakers and from behind them.
I have listened to everything from heavy metal to chamber music with these speakers and they handle everything well. They are not perfect, the listener will not be fooled into thinking there is a flute player in the room, but nothing else will do that either. Natural timbre is very important to me, and the Sony’s do it well, but I know it is just recorded music. The biggest factor in musical enjoyment is still the listener’s imagination, not the electronics or speakers!
As I have replaced pieces in my system the Sony’s have continued to improve. I am on my third amp. When I bought the speakers I had a Forte amp, I sold it to buy an Aragon 8008st, and now am in the process of buying a Krell FPB 200. I also have had three pre-amps. Since buying the SS-M7es. I began with a Counterpoint SA 5.1, which I replaced with an Aragon. After a few weeks with the Aragon I bought the first of two Krell pre-amps. I am now using the KRC 2. I am only now thinking that it might be time to look at something better. I have listened to many friends system with much more expensive speakers and still did not think their speakers were better.
The only real fault to point out was also true of both speakers. Using the test CDs I own I was only able to discern bass down to about 45-50 Hz. Neither of the speakers will reproduce the deepest bass.
As I listen it is hard to fault these speakers. The worst attribute they possess is the anchor of the Sony label. People have decided that they cannot build a good speaker. I know from experience that these speakers would be very popular if it were not for that label. No one who has heard the speakers has said anything bad about them. The fact of the missing low bass registers has been mentioned, not as a complaint as much as an observation. Audiophiles have to say something you know.
If you want to buy a great sounding set of used speakers for a little cash investment you owe it to yourself to listen to these speakers. A buyer can spend a lot more money and not get a better speaker. Take the Sony label off of them and lie to your friends (if you must), they will be impressed by the sound.
These speakers might truly be one of the best bargains in Hi-end audio.

Associated gear
Benz Micro Glider Cartridge
Sota Star Sapphire sIII Turntable
Rega RB-900 Tonearm
Sony SC-D777es CD Player
Krell KRC-2 Preamplifier
Aragon 8008st Amplifier
Krell FPB-200 Amplifier
Sony SS-M7aes Speaker
Purist Proteus Interconnect
Purist Colossus Interconnect
Cardas Golden C Interconnect
Kimber Kable KCTG Interconnect
Tara Labs Pandora S Interconnect
Monster Cable M 2.4 Speaker cable
Nakamichi RX-505 Tape deck
Home made power cords Power cord
Tice Audio powerblock 2 AC filter

Similar products
Focus .7
128x128nrchy

Showing 5 responses by clbeanzfb43

I'll give that ratshack treatment a try. Using a stepped resistor line stage on the highs and active line stage on the lows the transparency and pacing have improved another notch. What size room are you running your 9's in?
Thanks for the tip.
Although purchased several years ago, I am now posting this due to some good listening session w/these speakers only recently.
When first set up they sounded nice,imaged out of the cabinet well,but they had constrained dynamics,volume,and lows.Top end was detailed in macro sense.
The SSM7 would not deliver convinving vocals or volume levels for many music
formats although.Please don't get me wrong I am not looking to loosen plaster.
What a differnce some intensive listening and experimenting makes!Afer many weeks of closer listing to these and several other loudspeakers I had accumilated over time I took the mids out and looked them over.Due to several years doing car systems I had aquired an ear for problems in sound, just a nack from making literally every mistake possible
I was always bothered by way the ssm7 portrayed vocal fem/or male this belied thier high marks on a casual "Stereophile"
review of them from a show report.Maybe my pair were different then others?
I noticed when removing the mids they had the as spec implied lambswool dampen
ing material. A lot of it it was packed in tight,very tight.I removed 1/2 reassembled then listened,wow!Different speaker altogether mids now floated in 3d space between the speaker more convincing then ever before. Vocal had a full fleshing out now hootiness was gone,the mids together w/ the tweeters had an electrostatic like speed and openess.With time and patience I added back carefully matched wads of lambswool back in mid chambers till I noticed the degredation start then backed up one wad.Up and running they were magical in many respect except bass had a restricted fast roll-off in its character.So I removed the woofers and they to where packed way to tight but with dacron fiberfill(I asume lambswool was a costly makers choice so
sony used dacron as cost balance due to the sheer amount that would have been needed to fill main chambers).
I did about the same as w/mids only I re-
moved all the dacron and measured it back in in as careful as I could amounts.
These speakers are open fast dynamic,it has a completely convincing soundstage.
Also if you place them on heavy wood stands they play wood bodied inst very well,on more solid stands they convey speed much better or combine as I have a stack of 5 12 by 12" concrete step pavers with small balls of poster tack between all atop a short wood stands for a decent balance of the 2. All in all the Sony's can sing. saw 2 pair for sale ad dates early June both sets around 6 bills. just type sony ssm7 into search engine...
In response to previous posts,I believe the crossover is 4th order,cabinet walls 3/4",driver baffle 1".
Drivers Peerless classic series. Tweeters and woofers appear to still be available,midrange however I can't find cataloged.
NE1 else have any info on these wonderful loudspeakers please post here....
Back of cabinet [SS-M7] Mine have what appears to be peerless classic DH105 4 ohm
1" fabric dome. Made around 1994? The brace behind/below woofer does not attach to front baffle,as they did on later production.This as told to me by Sony es rep at"Hi -FI 97"
After a very long break-in period top end had nice smooth character but would not keep up with midrange or woofer.
So I did some tweeter tweaking. Took voice coil off magnet ass'y and removed the foam insert replaced with small wad of lambswool, much improved after two more adjustments as to amount of dampning in chamber behind dome.
They no longer sound laid back on highs.
Personally I think the things got wicked fine mids.If you remove most of the lambswool from mid chamber.Bi-amp these speakers.Now I do not normally tear into speakers like this but I had put these speakers away after trying them awhile.
I had purchased them after reading a short paragraph by Barry Willis was it? He raved about them and I had no idea what they looked like or how they really sounded, ah to be young and foolish. They arrived ,I listened,thought they
sounded awful recessed mids,no low end,tilted way down at the top. I put them away many years and went through other speakers,finally getting them back in a system and doing some trial-n-error tweaks, they my faves now,try them near-
field they are impressive up close.
I figure you run the 9's on a long wall.Sitting 8'or so
back.Then 9's out into the room about 2-3'.Listening chair out about 3-4'out from back wall.
The bass from the 2 eights in each SSM9 would be boosted
by wall behind you,which could effect openess in the mids
maybe.Room treating bumped up bass has been elusive for me.
Treating higher frequency problems by fine tuning placement
and room treatments (mostly pictures and a tapestry in my humble room)in addition to where you place your furniture.
I went long wall first but didn't dig the room boom I got
from having 12x20'ceiling angles from 7 to 9'.So I of course thought a mini amphitheater put the gear on long short wall sat at tall side. Due to bass being re-enforced
by back wall,it felt like I was hearing it instead of the
speakers.So I went with speakers on short wall and amps,pre
and CD player behind the speakers so I could keep all by
cable runs really short.The details went up from short quality cabling and I could run speakers away from back wall
3-4 feet easy,and still sit in a listening spot with no wall right behind Me.Speaker posistion from side walls reflection were solved mostly by listeng nearfield with a lot of toe-in.I moved the around bit by bit,and found about a 1" play could really effect image on side wall and 6"play
from wall behind speakers could tune it quite a bit.
When I hit 31" to tweeter center,44" to cabinet face from back wall....Nrchy I have to say it's like the wall behind and next to the speakers did not exsist any more.Now I'm
going to hazzard a guess and say since the ceiling run low
from the left and rises as it goes right,that I'm not getting a hot spot from highs down to listening chair?
I really like the sound of no wall behind Me or from around the speakers very much.Side wall reflection was the most time consuming thing to tune out by moving the speakers bit by bit and lots of listening into late hours.
"Fun ain't it!" lol
What kind floor is in your music-room raised foundation or
concrete slab?
Ah the "Shack" can most certainly fix "Audiotweakerjones"
I be glad one is 10 minutes away,but when you need one of something you always got to buy it in packs of two.