Review: Harman Kardon T-60 Turntable


Category: Analog

The Harman Kardon T 60 turntable,was one of the important turntables to come out in the early 80s. HK set out to build an affordable high end turntable that most audiophiles could afford. And to that end they accomplished their mission quite nicely. Belt drive turntable with a 3 point floating suspension,in a high mass chassis. Above average tonearm.Often referred to as the working mans Linn Sondek turntable. HK researched all the basic fundamentals,and produced an exemplary turntable that is ageless.Lets face it, basic engineering remains true.The HK T 60 is heavy at 18 pounds and needs a solid resting place. Grado cartridges work well with the tone arm. The platter is heavy at 3.3 pounds and has a high density mat,also the inside of the turntable platter is damped as well,to further reduce any ringing. Basically a manual turntable with auto lift at end of play,or you can defeat the auto lift by a switch. Has variable capicitance loading. But if you use a grado cartridge it is not needed.Grados are not sensitive to capictance loading. Comes with a heavy disc stablizer to insure proper contact of the record with the platter. As well has gold plated RCA jacks on the back of the unit,so you can use different interconnects cables of your choice.With the renewed interest in vinyl,this is one turntable to go after and acquire it just that good.From time to time they pop up on Auction sites and Classified sites. Usually sell for $250.00 to $325.00. They retailed for $449.95,when new. To sell for those prices in the used market,is sheer testament of their value some 20 years after they were new.I can speak with some authority on this product. I have owned one since new,and has never failed to deliver the music,crisp,clear,detailed,and with a transparency rivaled only by the finest high end tables.

Associated gear
Threshold Cas 2 Amp,Forte Model 2 preamp,Nad 4020 A Tuner,Denon 1560 CD Player,Polk SDA 2 Speakers.

Similar products
AR ES 1 Turntable,Linn Sodek TT,Kenwood KD 500, Ariston RD 40 and Oracle Alexandria.
ferrari

Showing 4 responses by ferrari

Try this place, they did have a lot of HK Parts.

Gramophone Shop Incorporated (303) 744-1284 2707 E Louisiana Ave, Denver, CO

Good folks easy to talk with, quite helpful.
Well my wife is certainly in that catagory. Been married 36 years and has been putting up with me and this hobby all these years. So in this regard have been most fortunate indeed.
Yes the tonearms are interchangeble. Should be no problem.Just a time consuming tedious job and some skill with a soldering iron. Take your time.
I have never known a drive motor to go out on these. Might want to check the small brass drive pulley on the motor shaft. There is a tiny set screw in the brass pulley. Check that first as over a period of time it can loosen.

Yes other motors from the T series will work. But is a time consuming job. If the motor has gone out, it is probably time to get another one or move into a newer turntable.