I have one thing to add - if your PSU is a separate unit, like mine that I use for my P5, I was told when I purchased it that it will function better if it is not turned off - I always leave mine on, and have never had any problems with it.
Rega TT-PSU drops right channel
Hi everyone. Recently my RP6 starting dropping the right channel as soon as the needle hit the record. My routine is (with the TT-PSU powered off):
- place the record on the platter after a nitty gritty clean
- power up the TT-PSU while giving the platter a nudge
- clean record with anti-static carbon brush
- needle drop
First I thought a tonearm wire was loose on the cartridge or something along that line. But, if I switch the TT-PSU to 45 and then back to 33 my right channel works just fine. I know Regas ground to the right channel. Could something be wrong with the cable between the TT-PSU and the table? TT-PSU malfunctioning (I think it is still under warranty).
Thoughts / recommendations? TIA
- place the record on the platter after a nitty gritty clean
- power up the TT-PSU while giving the platter a nudge
- clean record with anti-static carbon brush
- needle drop
First I thought a tonearm wire was loose on the cartridge or something along that line. But, if I switch the TT-PSU to 45 and then back to 33 my right channel works just fine. I know Regas ground to the right channel. Could something be wrong with the cable between the TT-PSU and the table? TT-PSU malfunctioning (I think it is still under warranty).
Thoughts / recommendations? TIA