I own and love the Durand -- seems like a good weight -- low enough that I can still use it on my spring suspended EAR turntable but high enough that it couples well -- it outperformed the Oyaide weight in my head to head comparison
Showing 2 responses by folkfreak
but does it not have an array of small ball-shaped spacers, mounted into the bottom surface at regular intervals around the circumference? Seems to me these stand-offs elevate the weight off the label, thereby greatly reducing its capacity to "couple" to the LP and soak up spurious energy.You are correct but these "spacers" are actually sapphire points that ensure the weight couples tightly and accurately -- are purely flat surface is actually anything but as you are probably aware, this way the design ensures that the damping effect happens through these three points -- I understand that the choice of materials and number and location of the "feet" was all assessed in the design. In my experience over coupling tends to in fact deaden and drag down the sound -- this has been my experience with all of the clamps I’ve tried. It is for this reason for example that the teflon spindle sleeve on the Durand is in fact specced to be ever so slightly loose when the weight is used so that the primary route for energy release is via these sapphire feet and not via the spindle (although of course not so sloppy that the weight can move in use, hence the choice of sleeves with each weight). I actually further found that with this weight I got best results whe I removed a small spacer I had been using under the label (the EAR has a recessed label cut out) thus taking out another energy transfer route not managed via the weight Any way I’d encourage you to give one a try and not let the price put you off, your dealer should be able to make an accommodation anyway -- I had mine on demo for a good while before taking the plunge ps more on my experience with this weight is found here Durand Record Weight thread |