Thanks for the tip, Froggy, I guess all of us swamp creatures need to stick together. FWIW, I swapped channels on the input tubes and the ringing has stopped, even tho the microphonics are still there. I have thought of tube dampers but then I read that some say that they "deaden" the sound somewhat. Any thoughts out there?
"Ringing from pre-amp
I just swapped out the Sovtek 6922s from my BAT VK3i pre with 4 NOS Siemens E88CCs. I did NOT replace the 2 Sovtek 6V6s. After about 4-5 hours of use, the pre has developed a significant "ringing" sound, a steady pitch tone that cuts out when I mute the output. It is not a hum, but a clear tone like you would hear if you struck a crystal wine glass. It is not present immediately after the mute-on-start delay kicks out, but appears within a few minutes thereafter. It is loud enough to be heard distinctly in the background with moderate level music and is quite noticable without any volume. I also notice a significant level of what I will call microphonics (when you tap the top of the case without any input (but not muted), it produces a sound thru the speakers. It occurs most prominently when you tap the case over the 6v6s. The unit is also running warmer than before. The sound, however, it more detailed and little more forward, with excellent bass. I did not get a chance to contact BAT today. I would also note that also I recently installed a BAT factory phono card. Any help would be most helpful. I am not an experienced electronics tech or only moderately handy. I do not have a nearby BAT dealer.