Questions about SACD vs.analog for classical music


I've just ordered a VPI Scoutmaster. A rather impulsive decision made at just the point when I was about to have my Sony 9000es modded. Not quite just at the point, but right after I removed my Hw-19jr/pt-6/Glider/blackcube rig from storage in order to get the parts ready for shipping to they new owners. I had what i thought would be my last night listening to the TT, after a several year hiatus, and you know what? There was that organic something, that harmonic coherence in certain recordings that I noticed only in the very best SACDs. In some of my LPs, that 'present' or 'real' feeling exceeded all but one or two of my SACDs (only the Rite of Spring on Telarc, a few tracks from the telarc classical sampler 2, and one other were superior to anything I heard on the VPI). OK, the SACDs were obviously cleaner sounding and more extended (I was using Stax sr-lambda phones) except when compared to a couple of the highest quality analogue productions lps I own, but it got me thinking: hey, if my humble jr. sounds this good now, I can only wonder how good one of the purportedly much improved high-end rigs would sound. The Sony mods would have cost upwards of $1300, but selling my jr. and lumping all that dough together and allocating it to a renewed involvement in analog looked, well, promising.
So I ordered a new Scoutmaster (at substantial discount) with the JMW-9 arm and am now by the way researching my options for cartridges and preamps. I've sold my blackcube, but have a Jolida JD-9 on load from a dealer, which sounds very nice with the jr. (the sold TT about to be shipped) - very vivid and harmonically satisfying, well articulated, etc - though it's not as quiet as the 'Cube and I even can hear some AM radio coming through my phones when I turn up my linestage preamp volume. But here I digress.
My main reason for starting this thread, aside from having some assorted questions about carts, preamps, and the like, is to ask for some objective and subjective opinions regarding the decision I just made. Bear in mind that my main interest is classical music, especially chamber (esp. string quartets, trios, wind quintets, etc) and piano with some orchestral, followed by classic rock and some Blue-Note era jazz. The SACD route seemed promising at first, and I told myself that, even though there were only a smattering of sacd recordings for many of my favorite classical performers (eg. Elly Ameling Soprano, Yo-Yo Ma, Rubinstein), there were so many truly talented lesser-knowns on the sacd scene (e.g. pianist Freddy Kempf on BIS, Csaba and Heisser on Praga digitals, and of course Paavo Jaervi on Telarc) that I deemed my chances of attaining long-term satisfaction with purely sacd (and a little redbook on the side) to be very good. Especially after sacd mods. As for classic rock, the SACD of the Police Synchronicity just blew me away (through Sennheiser HD600w/cardas cable).
But THEN it occurred to me that the only way to possibly hear my very favorite string quartet - the Vegh Quartet - in better than redbook fidelity was through vinyl. Ditto for numerous other performers who will never appear on sacd. Then of course there's always the Beatles, Stones, Jerry Garcia and others to sweeten the deal for vinyl. By the way, I sold my Ikemi redbook player in order to open up some new options and try something new. Even my girlfriend almost cried to see the Ikemi go, her having been converted just enough to an audiophile that she could absolutely see someone justifying having spent almost four grand on a source component (even a non-disc changer)
So what do you guys think? When my scoutmaster arrives, am I in for some visceral thrills and deep musical connection? I know that it's also dependent on the rest of my system, and so far I've narrowed cart choices down to the Lyras and the Shelters, leaning heavily towards the former. As for phono preamps I'm considering the Linto, Ear 834p mm/mc, and a few others including a modded Jolida JD-9 or something along those lines.

Is the scoutmaster, fitted with a $1000+ cartridge and a similarly priced phono preamp, going through Cardas golden reference into either a Bryston B60 integrated (and then to Sennheisers or B&wdm603) OR into a Stax srm-t1 tube driver of my Stax electrostats, going to 'knock my socks off' as suggested by Mike at VPI yesterday? How close can I get to SACD (especially to the 'pure DSD') fidelity through this setup? I know speed stability and noise floor will be drastically improved, giving tones accuracy and timbral accuracy, and i expect bass to be better and overall macro and microdynamics as well BUT... am I going to be able to achieve some of the same absolutely organic, sparkling, and pure sound of some of the better DSD recordings? What about the musical clarity per se of redbook, in particular when listening to string quartets and the like? Will I get a 'clean' sound in the tonal sense, not overly dark, but a sound that seems right? What about the upper octave of piano?
I once read an article long ago (i believe it was in stereophile) in which the author admitting to prefering cassette tape over vinyl due to it having cleaner and more pitch accurate upper octave reproduction. That was then, this is now. What do you guys think? (last time I'll ask that, I promise!)

Ted
tedd1

Showing 6 responses by eldartford

Lazarus28...I have sworn off expressing any opinion about vinyl vs high res digital (you want to see the tooth marks?) but I must agree that the "you've never heard good vinyl before" remark is tiresome.
I have some SACDs that sound really good. (45 KHz is a bit beyond my range of hearing). I have some DVDAs that sound really good. I have some CDs that sound really good. I have some LPs that sound really good. But I have no CDs that are multichannel, and if you have a first class multichannel system, that is a big deficiency. Actually I do have a few LPs that are multichannel (SQ) and a small number of them sound OK. But not even close to DVDAs.
Stefanl...Physical design of the ear (Intelligent or otherwise) precludes hearing 45KHz, and what the brain can't hear is unlikely to annoy it. On the other hand, extreme low frequency sound is felt if not heard. Play any LP on any playback system at LOUD volume (as audiophiles are wont to do) and the rumble will give you a headache.

So I guess it's "pick your poison" situation.
[email protected] too have matrix multichannel capability, and it is true that you can run a stereo CD signal through it and make noise from the rear channels. Your point is well taken. Actually, the big problem with quadraphonic LPs was that the rear signal was represented by vertical groove modulation, and was very noisy, especially where only a small rear channel signal (ambience) was involved. Theoretically this should not be a problem with CDs, where the differential signal ought to be just as good as the common mode. However, I have not found that CDs respond well to matrix multichannel processing. Many LPs that were not intended to be anything but stereo do respond well. One of the best (IMHO) is a Judy Collins recording of "Amazing Grace". I have this on LP and the same performance on CD, and I looked forward to hearing the CD. What a disapointment! They must have remixed the CD and completely killed the effect. The performance is recorded in a church with congregation, and on the LP, after the singing ends, in addition to ambience, you can hear people behind you closing their hymn books and putting them into the racks on the backs of the pews. On the CD they completely cut out this part of the recording.
[email protected] we have been on parallel tracks. I also have a Lafayette SQ-L decoder and two Phase Linear 1000. The PL 1000 is controlled by the A+B mono signal, so if you want to use one for the rear channels (where it really is needed) you need to invert one of the rear signals. If you put it in front of the decoder expansion on the mono signal kills the differential (rear). When records are made they must expand on mono, because I discovered that using a DBX expander/compressor I could recover the lingering ambience that is artificially attenuated as the mono signal dies out. By the way, I devised my own logic decoder using the DBX before such devices were available to the public.
[email protected] control signal for the PL1000 functions is L+R. To the extent that rear channel noise spectrum is similar to front channels your hook up will work. What I am talking about is putting a PL1000 between the decoder and the rear amps. That won't work unless you invert one of the rear channel signals. But if you do this inversion the PL1000 is controlled by the LR+RR signal, which is optimal.

All your comments about finding balance null are familiar. I found that tone controls could also be tweeked up this way.