Preamp Output Capacitor: Mundorf Supreme vs. Supreme Silver Oil


Anyone compared the bass response of these two caps?  I bought the Supremes for trial purposes and really loved what they did to my system's imaging (front to back layering) and immediately bought the Silver Gold Oil Supremes.  Unfortunately while they were smoother, more beautiful, and even better at imaging, they had no bass (actually, they lost bass as they broke in).  Anyone know how the Silver Oil's fit into the line?  

I'm using them in a Don Sach's DS2 Preamp ( https://systems.audiogon.com/systems/7983).  

Thanks.
52dc3b0a 7875 49c3 80f0 43cd1076b7e0cal3713
With tube gear where the input impedance is typically 100K or more, a 0.68uf coupling cap is fine.
The smaller value you can get away with, the better the cap itself will sound (and no need for a bypass). That is why we have a direct-coupled output in our preamps, so that the significant cap in the circuit is only 0.1uf.
Could someone explain why adding a 0.01uF capacitor in parallel/bypass with a 2.2uF capacitor improves sound quality? 
If this is way off topic and I’ll delete the post and ask elsewhere.
Thanks.
Not everyone agrees that a small bypass cap improves sound quality.  I have tried bypass caps in all sorts of applications going back literally 40 years and I haven’t found a single instance where the bypass improved sound quality.  The bypass certainly changes the sound; usually the bypass makes the sound brighter, leaner and less coherent.  I much prefer the sound of a single quality cap like a Copper V-Cap over any combination of caps with a bypass.

You may reach a different conclusion so by all means try it yourself, but don’t be surprised if you tire of the sound with bypass caps.
It depends on the combo and position. The Vcap Odam & Cuft bypass are a match in heaven. Chris from Vcap turned me onto it. I will say it is magic on the output of a dac which is where I have used them on 5 occasions now. I am sure they would sound as wonderful together on the output of a preamp.  I am using them on a tweeter next and will report back. 

Some combos just work and some just dont.  Learn from experience.  The Jupiter copper foils bypassed with the Duelund silver foil bypass cap also works wonderfully.  In my experience the two examples work and I have used them extensively. 
Thanks. I’m not questioning the results, one way or the other, just wondering why and how it makes a difference. Apparently, in the chip design the different value and material parallel/bypass capacitors are used to push the inductance of the capacitor to higher frequencies and the combined impedance(s) of the capacitors is lowered across a broader frequency range. But that’s at MHz region. I’m guessing the same/similar phenomenon occurs in audio. Otherwise, on the surface you’re just adding the capacitances of the two capacitors.