2. misc-audio
  3. 1264724056

Please Help Me, I'm Lost

I'm at a point here where I really need some help. I feel like I've made some good choices in my equipment but I'm not getting the results I'd like. I do feel I'm somewhat rooted in the past as my formative years in audio were the 70's and early to mid-80's and this is reflected in some of the equipment I own. I think AudioGon and eBay have enabled me to try to recreate the past but it has been disappointing after the initial excitement. I listen to a wide variety of music both CD's and records. What has been driving me crazy is a sibilance I hear on female vocals and some other HF content playing CD's and some records. I have Maggies 1.6qr's which I bought used from a dealer about a year ago, supposedly broken in. The rest of the chain is; a vintage GAS Thaedra recently serviced and in great shape, a Classe CAV-150 which I use only two channels (there are some issues with this amp,one channel is out and only one pair of the three pairs will bridge), a Pioneer Elite DV-59AVI, and an Ortofon 2MBronze cart mounted in a Grace arm on a Linn Basic TT. I was using a single run of 80's era Theta Litz cable which I thought were pretty good. I had experienced upper end harshness before with a really cheap cable so I changed the Theta cable to a run of shotgun DH Labs T-14s I bought from Swampwalker when I purchased his Vandersteens awhile back. I also switched to a GAS Son amp. The DH's are a bi-wire set-up so I actually made three changes, maybe not the best way to figure things out. I don't have resistors installed to pad down the Maggie top end but I do use the Thaedra's tone control for that purpose.This was a positive change. Top to bottom my Maggies sound better but not there yet(I have tried many positions for the speakers and don't think an improvement will be made there). I disconnected a sub from the Thaedra which I had been driving with the second set of preouts and this seemed to make an improvement. I switched back to the Classe amp slight overall improvement but didn't improve the sibilance issue. This Pioneer(which I bought for my home theater system several years ago, now replaced by a Blu-ray) as a CD presents alot of detail nice image and sense of the space but lacks whatever it is to make it special and I know that, but the sibilance issue persists.I would have expected the Pioneer would be at fault for what it didn't do and not for adding this sibilance. Records seem to be fine as the condition of the record and quality of the recording appear to dictate the results.I feed my HT system into the Thaedra so I tried a cd in the blu-ray connected digitally to a HT receiver and then to the Thaedra. It sounded fine not the detail of the other player but no sibilance. Movies and music DVD's sound fine too. Soooo..... what should I do? Are the DH cables with silver a bad match with Maggies? Is the Theadra outdated and out classed? Would a Dac solve the cd problem? Or get a new player? Or are my Maggies not broken in yet or even defective? Please HELP! I feel like I'm chasing my tail..
rickmac

Showing 4 responses by rickmac

rickmac OP
43 posts
 
Thanks for the suggestion. Thanks also for reading my post, it was kinda long and rambling.
rickmac OP
43 posts
 
Thanks for your posts. My room is 15' wide by 24' long and is open in the rear to the kitchen. Do the Maggies come with resistors to pad the top? The Poineer wouldn't have been considered at all if at the time if my focus was two channel, but as a dvd player it is excellent, one of the first to offer HDMI, upsampling video, and SACD to boot. I have kept my HT and my music systems basically separate. I feed the main channels of my HT Receiver to the Thaedra Aux 2 and have a vol. position which level matches the system for HT use.

I will have to change my speaker cables because the DH'ers are too short for my set-up. I would consider a new player but a Dac might be a better choice especially if it has a USB to connect my computer, and if the Pioneer will function as a decent transport.

Thanks All
rickmac OP
43 posts
 
I couldn't find any ferrite cores at my local Radio Shack but did buy and purchase those 1 ohm resistors and installed them. Thought I was onto something but that changed when I played Alison Krausse and Union Station Live on SACD. I think the suggestion of inductors on the speaker cables is what I'll try next. Thanks Jult52,ETbaby,and Dfhaleycko for your advice.
rickmac OP
43 posts
 
Just an update:I started by organizing and routing my interconnects so a/c wasn't next to signal. Things had gotten sloppy. I turned my cable box off. Bought some suggested inductors from Mouser as suggested and as explained in the Planar Asylum. Found the ferrite cores and placed them on speaker cables and a/c lines.These were applied in steps and each one yielded an inprovement in taming the sibillance. The cores on the speaker cable made a change which I'm still on the fence about. I also determined that I have a 'hot' corner in my room which is contributing to the problem. Lastly there is a drum kit broken down but still in the room which is resonanating. A light bulb went off this morning when I blew my nose and could hear the drums responding.Duh!
I think the main thing I relearned from this exercise is that everything matters. Some might call them tweaks but these are really the basics. You really do need to remember the fundamentals.
More to discover