Hi : I think Rushton makes a good point.Once up and running you maynot need to Hydra...I did the 3 line dedicated line upgrade ( 12 guage ) ,with 2 for analog and one for digital and it worked out great..I am using the Vh Audio flavor4 power cords you mentioned (with the Gold option..) Very good p/cords for amps...for the money ...You could also consider Albert Porters cryo Hubbles for plugs..They work very well and only cost $36 (aprox each)..
PC & Dedicated Power Lines Questions
I'm about ready to upgrade my powerlines with dedicated 10awg 20A runs. To see what's in my system, click "system". I have just added a Shunyata Hydra 8, but haven't upgraded it's power cord yet (thought I'd make my own). A little background, I'm a electronic tech and I work on big servo looped systems (CNC mills, stretch presses that are analog feedback). So I know how important it is for good cableing with no noise. Most my power cords are DIY with either 10AWG wire or beldon 83803 with Oyaide P/C-79 connectors. My amps still have the OEM cords for now untill I get my incoming power straightened out.
Question 1) I was going to add 3 incoming lines with 10AWG wire on 20A curcuits off of the same leg or phase. One for each mono amp (might add my soround amps on them too) and a third to power all the front end stuff including a TV. Is this overkill? Should I just plug the hydra in my already supplied 15A line (it has a pass-Seymour outlet) and just add dedicated power for my amps?
Question 2) Power Cords. I just can't beleave the cost of these!! I can get hi quality fine strand 10awg copper twisted 4 conductor cable for free. I also have a bunch of 5 cond 16awg twisted with sheild. I was tempted to make power cords for my amps and Hydra from this and I have made some power strips already with Oyaide and Pass & Seymour outlets (see my system for pic under Oyaide). The Beldon 83803 is a PITA to work with and in my field it is considered cheap cable. I'm suriosly looking at VH Audio Flavor 4 DIY cords with Oyaide connectors. Flovor 4 for amps and Flavor 2 fro my Preamp. I have a sheilded beldon on my CD player now. What are your thoughts?? What PC cord should I use for the Hydra, was going to buy a used Shunyata Python Alpha, but just thinking of making a flavor 4 for it? Sorry for the long post but am curious to opinions. Thanks.
Scott
Question 1) I was going to add 3 incoming lines with 10AWG wire on 20A curcuits off of the same leg or phase. One for each mono amp (might add my soround amps on them too) and a third to power all the front end stuff including a TV. Is this overkill? Should I just plug the hydra in my already supplied 15A line (it has a pass-Seymour outlet) and just add dedicated power for my amps?
Question 2) Power Cords. I just can't beleave the cost of these!! I can get hi quality fine strand 10awg copper twisted 4 conductor cable for free. I also have a bunch of 5 cond 16awg twisted with sheild. I was tempted to make power cords for my amps and Hydra from this and I have made some power strips already with Oyaide and Pass & Seymour outlets (see my system for pic under Oyaide). The Beldon 83803 is a PITA to work with and in my field it is considered cheap cable. I'm suriosly looking at VH Audio Flavor 4 DIY cords with Oyaide connectors. Flovor 4 for amps and Flavor 2 fro my Preamp. I have a sheilded beldon on my CD player now. What are your thoughts?? What PC cord should I use for the Hydra, was going to buy a used Shunyata Python Alpha, but just thinking of making a flavor 4 for it? Sorry for the long post but am curious to opinions. Thanks.
Scott