Oppo Nuforce BDP-93NE

Hi everyone. I cannot decide between the 93NE and 95 for AV (Bluray and DVD) and auido only (CD, etc) playback. I am concerned about fan noise on the 95. My setup would include either the 93NE or the 95 HDMI video to a monoprice HDMI switch box then right to the LG 50PV450 50" plasma. For audio, I will use the analog out with only the left and right front channels enabled (rest of channel info mixed into the left and right channels) since I am a two channel guy. Preamp is a NAD T163 in two channel mode for all analog and digital inputs and my amp is a Audio Refinement multi 5 used to drive my Tekton 6.5t in biamp mode. I do not need balanced outputs from the Oppo to my preamp. Whichever Oppo unit I go with, it will be replacing a Linn Classik Music as my CD source and a Sony BDP-470 as my DVD / Bluray source.

Upgradebug_up_urass:

I will be trading in an Audio Refinement Pre5 and Multi5 for a custom Rogue Cronus Magnum (on order right now) powering some Tekton 6.5t (50Hz - 25kHz, 92dB sensitivity, 4 Ohm - http://www.tektondesign.com/Model65t.htm). I was planning on ordering the BDP-93 NuForce from the get-go, but I might try the factory BPD-93 first and then consider the NuForce upgrade. Is there anything different between a BDP-93 NuForce ordered from the factory vs. the user install board?

TIA,

Scott

One more thing Upgradebug_up_urass mentioned about the BDP-93NE in his system. He mentioned the NE sounded wooly in his system, which is exactly how my tube / turntable dealer describe most MM cartridges (especially lower end ones - subjectively putting on my flame suit) and I ended up going with a MC Ortofon (MC-3 turbo) that just "woke up" my LP listening experience (going to a Pro-ject Tube Phone Box II also helped quite a bit).

@Upgradebug_up_urass, do you agree?

Moomoo, do you hear any fan noise with the stock 95? How quiet is the rest of you gear before you added the 95?