2. digital
  3. 149440-131472

Only $800 to work with streamer/power for 3rd system

I am looking for a preferably one-box or potentially two-box solution that will provide the best sound quality to stream Tidal (ethernet or wireless can work) including MQA and power my existing passive speakers (plus powered sub).  This will be for my office system at work, where I have a solo office in a large building full of other tenants.  So no loud playing most of the time but want good quality, per limited budget.

Speakers will be NHT C1 bookshelf pair with Sunfire SDS8 mini sub.  These are already in house.  Hope to keep the streamer/power solution to $800 total, given the modest speakers.

Other considerations:  Really want 32-bit DAC and MQA capability.  Don't need much power.  Don't need storage or ability to control storage - just Tidal streaming, but want Tidal support natively built-in.  Don't want to use my phone or computer because already using them at work - want the streamer/power solution to handle.  On second thought I guess control app from phone is okay, just don't want to be bluetooth streaming from phone or computer.  Would prefer new, not used, but factory refurbished is okay with warranty.  Won't use other sources, just Tidal.  Don't want multi-channel AVR, only need stereo.

The two options I'm most focused on are Bluesound Powernode 2 or 2i, and the Integra DTM-7 stereo receiver, each of which are single-box solutions.  Other options could be PS Audio Sprout 100 integrated for $600 (or NAD, Marantz, other integrated similar cost?) with a separate streamer, but I'm not aware of a separate streamer for $200 that has a 32-bit DAC and handles MQA.  Yamaha WXAD-10 seemed close but best I can tell (not real clear) I think it has 24 bit DAC and anyway it'd push total closer to $1000 with Sprout.

I am familiar with the Integra DTM-7, as I have the DTM-7 as the HT hub of my current bedroom system, and with its HDMI/Dolby Vision/HDR support it is killer in that role for $650 for a 2-ch setup.  But for Tidal music the sound through the NHT C1's was a little bright and after couple hours slightly fatiguing for me, although doable if that's what I go with for 3rd system (I'd get another DTM-7 for office if that is way I go).  I've since upgraded my 2nd system speakers to Spendor SA1 and they sound great powered by the Integra in system 2, better combination - no more brightness/fatigue.

But now with the NHT C1 speakers freed up for system 3, I'm wondering if I can do better than the Integra for a music-only application for my office.  Has anyone compared sound quality of Bluesound Powernode 2 (or 2i) with the Integra?  Does Bluesound have a warmer sound?  FWIW I know the Integra is class A/B, and I think Bluesound is class D.  Oddly, I think Powernode 2 and 2i share same amplifier and DAC (but 2i includes some new features that I probably wouldn't use - Airplay, etc.), yet What Hifi review claims sound much improved with 2i.  Powersound 2 is $600 now, while 2i is $800.

Or am I overlooking a better solution?  Thank you
kren0006
Post removed 
kren0006 OP
1,859 posts
 
Got the Powernode 2 installed and up and running. Setup quick and easy, apart from running Ethernet cable 25 feet through ceiling drop panels, not too bad though. Bluesound interface and updates easy and intuitive. I’d call interface similar to Lumin and Heos, probably a bit more full featured; better than Play-Fi. Tidal streaming seamless.

Sound quality on initial impression with the NHT C1’s seems slightly better than that from the Integra DTM-7 stereo receiver that I have in my bedroom system when C1’s were there. At least it sounds warmer, which is what I wanted because got some listener fatigue with the Integra/NHT combo. Now is it as full-bodied? Jury still out. Although because the Powernode 2 is deployed in office building I can’t play very loud (which would help with comparison) so there’s that ...

Feeling good about things so far. Next on wishlist will be upgrading the Sunfire SDS8 sub in system 2 so I can get that little guy in here to rejoin the C1’s, missing the bass ...

Waiting for neighbors to come knocking or pounding on walls ... So far, so good ... (maybe they also like to hear the blues?). Buddy Guy killing it as I turn it up a notch ...
veroguy
137 posts
 
Congrats!


kren0006 OP
1,859 posts
 
thanks!
kren0006 OP
1,859 posts
 
Well, I now have two days of lots of listening and not enough working with the Powernode 2. I think it’s getting better with run-in. Probably 10 hours now. I find its sound to be warmer and better match for my NHT C-1’s than was my Integra DTM-7 at home. But I still find that the DTM-7 could produce a meatier, fuller-bodied sound, able to dig a little deeper, at least so far; hopefully with more break-in the Powernode 2 will keep improving. All that said, I prefer the Powernode 2 pairing with the NHT C-1’s versus the Integra DTM-7 with the C-1’s (the Integra was just too bright, I felt, for these speakers), so in that sense I made the right choice, given these speakers.

But the Integra DTM-7 with my Spendor SA1’s at home beats this work combo, but that’s likely because the SA1’s are about 4x the price of the C-1’s (even as Powernode 2 couple hundred $ more than the Integra), and my already known-to-me personal preference for Spendor generally over almost any other speaker brand available under $10k, at least as far as the couple dozen speakers that I tested when I went through extensive auditioning for main rig within last year.

What I really need to do is sneak the SA1’s into work to test with the Powernode 2 to gauge the Powernode 2’s capability, but that would attract too much attention at home. I’m trying to keep this workplace update under the radar, if you know what I mean ...

So, for those keeping score, I rank my second and third systems and combinations to extent I’ve heard them at this point:

1. Integra DTM-7 with Spendor SA1.
2. Powernode 2 with NHT C-1.
3. Integra DTM-7 with NHT C-1.
More to discover