Next upgrade for vinyl rookie


Being new to vinyl, what upgrade would be recommended next with a budget of $300 to $400.
My system:
Rega P2 turntable
RB250 arm w/Heaveyweight counterweight
10x4 dynavactor cartridge
Project phone box
Ringmat
ASL 2004 preamp
Odyssey 2 channel amp
Would a new table or upgraded tonearm be next?
trip
Trip, If all you are stepping up to is a P3, then I don't recommend it. The main difference between a P2 and P3 is the cost of the arm. You may not even hear any difference between those 2 tables. Moving to a P3 could hardly be called an upgrade from a P2. You need to make more of a move than that to get any real results. Save your money for a higher level table. Just listen to what you've got while you're waiting.

I'd recommend the phono stage if you are thinking along the lines of a P3 for a table upgrade(upgrade?).
Thanks for all the advice. I will have to decide now to either get the Monolithic Phono amp or the Rega P3, either way the investment will be worth it.
Well, Trip your arm clearly exceeds the capability of your table. I'd look at that option, and if you have to wait a little to save the money, do that. The table will yield the most sonic benefits.
I have the Express machine end stub w/ the Heavyweight counterweight. I like the sound of my system which is 1 year old. I just have that bug to upgrade to get a little more out of my system. I have the Disc Doctor Cleaner. You guys know how it is the upgrade fever.
As others have mentioned, you've got a good arm and cart, but a not so good table and phono pre. 400$ won't get you far w/ the table, but it will w/ the pre. I'll second TWL's suggestion concerning the end stub, Sugarbrie's tip on alignment, and Nrenter's vote for the DiscDoctor stuff. If you still feel like spending some money, I'd get the Monolithic phono pre. They can be found here on audiogon for >300$ (and check out the tubed phone pre kit at bottlehead.com--interesting). You can take the arm and phono pre w/ you when you have enough for a significantly better table. Have fun.
What is it that makes you unhappy with your system? What are you expecting out of your system? Are you sure that your source of dissatisfaction is your table?

Personlly, I would buy the DiscDoc cleaning system, then spend the rest on some vinyl.
Doing some Tweeks like some mentioned above are a good idea before dishing out more money. Do you have a proper alignment tool? If not, getting the cartridge aligned is the first stop before passing judgement on your current setup.
Post removed 
How big of difference would swapping out tables be compared to a OL arm upgrade?

Do you not know that the stock 250 is already better than the P2? Sell the arm with the table (b/c it won't sell without it), and maybe keep your accessories depending on what you choose as your next table. I don't think the LP12 is a good choice for a rookie, maybe a used P25.
Maybe I can sell my P2 table, use that money plus what I have saved so far and buy the Linn Sondek LP12. What could I get for my table? How big of difference would swapping out tables be compared to a OL arm upgrade?
New table. The arm is good. Get the Expressimo end-stub, if you don't have it already. That way you can still use your Heavyweight. If you got the OL end-stub, your counterweight might not fit. The end stub would be the next logical thing for the arm.

But the table is where the real upgrades will come. For $400, you are going to be severely limited. If you are lucky, you might find a used Linn Sondek LP12 for around $500.
I have a pretty decent vinyl front end, and the VPI
16.5 made a substantial difference in my listening
pleasure. Not only does it quiet the surface noise,
but it also improves the sound: more dynamic, better
bass, greater transparency.

The two biggest improvements in my system have been
the TacT RCS 2.0 and the VPI 16.5
I'd say buy a used vpi 16.5 cleaning machine. That's a ugrade that you will forever keep. It's a big step up in sound quality.

Then upgrade your table down the road...
If you want something now, think about an isolation platform for the Rega such as a Target TT1 wallmount. Experiment with various cones and platforms on the rack. But I think you get the most bang for you buck if you upgrade as early in the chain as possible.

Phono stage is a good idea but will probably exceed your budget.

I would suggest waiting until you have more money before you upgrade. Small upgrades are generally more expensive, because they quickly get replaced, usually at some expense. If you had to do something now, consider a phono stage.