Newbie question


I understand that my receiver puts out X amount of watts per channel.. let’s say 50 watts..
Do these 50 watts come from an integrated amp built inside of the receiver?
here’s my question..
if I am going to add a power amp to my receiver does it really matter whether my receiver puts of 50 watts or 150watts per channel if I’m adding a power amp that is let’s say 2500watts per channel..
im looking at buying a vintage receiver but if I’m going to add a power amp of 2500 watts and the receivers wattage is really of no matter then I will buy a 35 w per channel vintage receiver instead of a very costly 180w per channel receiver. Thank you for all your help 
roycerichards

Showing 1 response by reubent

A receiver is a tuner, pre-amp and amp built into one chassis.

An integrated amp is a pre-amp and amp built into one chassis.

If you are going to buy a vintage receiver and want to add an amp to it, essentially bypassing the built-in amp, you will need to buy a receiver that has L&R line-level pre-outs. Many receivers do have this feature, however many inexpensive units, i.e. low-power units, did not have this feature.

High quality vintage receivers are cool. I've owned a couple. However, they are old and may require refurbishment and/or repairs to get them into proper working order. Additionally, they often require periodic cleaning of the volume/balance/tone controls, etc. They also will not have remote control.

Unless you really enjoy the nostalgia of a vintage receiver, I wouldn't recommend one, just to use it as a pre-amp/tuner. And unless you listen to over-the-air radio, I wouldn't recommend a receiver at all.

There are lots of really good integrated amps on the new and used market. I would get the best quality integrated amp I could afford and not have the need to add an external power amp and hopefully it would also have remote control.

That's one man's opinion and YMMV. Good luck in your search.