2. analog
  3. 1124404227

My Planar 25 has a Poltergeist - Seriously, Help

I went to go play a record. I put the stylus down and all I heard was a "Sooshing" noise comming from the left channel no music at all. I lifted the stylus up and the noise DID NOT go away, still "Shoooshing" with the arm in its rest position. Then I shut the motor off, the noise went away slowly as the platter slowed down. Turned the motor back on again and I was in business playing music like nothing had happened.

Holy crap! Can anyone come up with an explanation for this one?

All my cartridge connections were intact.

Also, I can't recreate the problem.

Thanks guys, this one is weird, I know
bobbyb94e1
8 responses Add your response
bobbyb94e1 OP
3 posts
 
Nah, I'm gonna keep it all stock. I like going against the grain sometimes.
theo's avatar
theo
2,655 posts
 
Now is a good time to do the Incognito re-wire. I did on mine and it helped considerably.
nsgarch's avatar
nsgarch
2,524 posts
 
Exactly!
bobbyb94e1 OP
3 posts
 
I think I found the source. It has nothing to do with the motor.

It is Rega's wonderfull arm wiring.
nsgarch's avatar
nsgarch
2,524 posts
 
If the motor wasn't grounded to the preamp, or phono preamp, you'd probably get a hum, but you'd still get a signal on the left channel. I still think you have an open signal path. Disconnect both RCA's from your preamp and with the phono selected, slowly turn up the volume moderately. You should get that sound on both channels.
bobbyb94e1 OP
3 posts
 
It happened again. Is it possible that the motor is not grounded properly?
nsgarch's avatar
nsgarch
2,524 posts
 
That kind of sound is usually due to an open signal connection. FWIW
fedreams
107 posts
 
Sound like a short circuit in the path, could it be possibly an interconnect or your phono stage.
Log in to respond
More to discover
80x80
Lenco Standard
80x80
ZYX Ultimate Exceed Astro
80x80
Air Tight PC-1S