Thanks for the replies so far. I' using a VPI Scout with the JMW 9 arm. The arm tube is parallel to the record surface at playback mode and I've spent some time setting the rest up (azimuth, tracking force, etc, etc). I'm just a little unsure if the 10x5 does in fact "ride low". The stylus of my cartridge bends up to the point where you probably wouldn't be able to stack three business cards between the record surface to the underside of the cartridge body where the stylus comes out. This clearance just looks awfully tight. If this is how this cartridge sits, then that's fine. I'm beginning to appreciate its sonics (compared to my Denon 103). Thanks again for your comments.
My Dynavector 10x5 sits too low on the record
My Dynavector 10x5 sits a little too low on the record surface as it glides through the grooves. The tracking force is set at 2.0g which is right in between the recommended range. The stylus does not wobble or anything and it looks to be secured, not loose. Is this normal? I bought this cartridge used from an honest seller who told me he’s only played 10 records on the cartridge. I haven’t really noticed how low the cartridge sits on the records until recently. Does the 10x5 stylus really bend up that much as you lower it onto the vinyl surface? Any input would be appreciated.