I actually owned the "newer" model of this amp that had the bridge rectifier installed. It still had low level hum in one channel, so the issue is inherent in the design of the amp. I know this because I called Cary and discussed it with them. To be fair, the hum was tolerable, but I felt unacceptable for an amp otherwise of this level of overall quality and associated cost, so I eventually traded it in to a Cary dealer on another amplifier. Two more comments. First, as SS amps go, I thought it sound really good, more musical than many I have owned. Second, having once owned many pieces of Cary gear and having had several upgraded or modded by Cary, they charge a lot for the parts they provide and their service, but they do really good work and are honest people. It’s really a matter of caveat emptor.
My Cary amp - the story of a hum and a bug
Hi,
I have had a problem with my Cary SA200.2 power amp from the time i bought it 3 years ago. There's a hum from both speakers (doesn't increase when the volume is turned up). The hum is there irrespective of the connected preamp or power source and even if i take the amp to another city or location. I was told by the dealer that such a mild hum is normal in such a powerful amp. It was only later that I realized that a solid state amp with a toroidal transformer, however powerful, should not have any audible hum. By then, it was out of warranty.
With the help of the India dealer, I wrote to Cary in the US. From their delayed and intermittent responses, it appears that the hum is a known issue, inherent in the design of the amp, that needs a 'fix', which is taken care of in the newer model of the amp. The 'fix' consists of a cable with caps and a bridge rectifier. Shockingly, they expect that I should pay around $210 + duties for this. To me, it is not a question of money, but one of principle! Why should I pay for them to fix a bug, even if the amp is out of warranty? I even suggested that it will not cost me more than $30 to build the cable here in India if they can send the diagram and component values for this fix. But Cary is adamant that I either pay for the cable or trade in my amp for a new +1 model!! In desperation, I requested that they send me the service manual of the amp, hoping to address the bug with the help of the manual. Back comes the reply that it is proprietary and that they cannot share it with customers. The dealer has been unable to exert any real pressure on Cary to resolve this issue.
I would like to know, from fellow FMs:
1. Is Cary justified in it's stand?
2. Role of local distributors/dealers?
3. Does any other FM own a Cary SA 200.2 and how he has fixed this issue.
4. Can the electronic experts suggest the specs to filter out the hum?
5. Will adding this filter adversely affect the sound quality?
CUT TO CHINA:
I have a Chinese made integrated amp (Kinki Studio). It is no slouch, having been awarded the Blue Moon award by none other than Srajen of 6moons. I blew the amp some time ago by an incorrect connection. It was my fault. But within minutes of sending an email, the dealer in Singapore was on whatsapp chatting with me, asking for photographs, communicating with the manufacturer, suggesting diagnostic checks. Within 24 hours, they realized it could not be fixed via distance communication with a non-electronics-trained user like me. Within a week, a pair of new power amp boards arrived by DHL, shipped at the dealer's cost, with detailed instructions on how to replace the boards. The only cost I incurred was the cost of shipping the old boards back to them for diagnosis. So I guess Xi Jinping wins this round :)
Thanks for reading
I have had a problem with my Cary SA200.2 power amp from the time i bought it 3 years ago. There's a hum from both speakers (doesn't increase when the volume is turned up). The hum is there irrespective of the connected preamp or power source and even if i take the amp to another city or location. I was told by the dealer that such a mild hum is normal in such a powerful amp. It was only later that I realized that a solid state amp with a toroidal transformer, however powerful, should not have any audible hum. By then, it was out of warranty.
With the help of the India dealer, I wrote to Cary in the US. From their delayed and intermittent responses, it appears that the hum is a known issue, inherent in the design of the amp, that needs a 'fix', which is taken care of in the newer model of the amp. The 'fix' consists of a cable with caps and a bridge rectifier. Shockingly, they expect that I should pay around $210 + duties for this. To me, it is not a question of money, but one of principle! Why should I pay for them to fix a bug, even if the amp is out of warranty? I even suggested that it will not cost me more than $30 to build the cable here in India if they can send the diagram and component values for this fix. But Cary is adamant that I either pay for the cable or trade in my amp for a new +1 model!! In desperation, I requested that they send me the service manual of the amp, hoping to address the bug with the help of the manual. Back comes the reply that it is proprietary and that they cannot share it with customers. The dealer has been unable to exert any real pressure on Cary to resolve this issue.
I would like to know, from fellow FMs:
1. Is Cary justified in it's stand?
2. Role of local distributors/dealers?
3. Does any other FM own a Cary SA 200.2 and how he has fixed this issue.
4. Can the electronic experts suggest the specs to filter out the hum?
5. Will adding this filter adversely affect the sound quality?
CUT TO CHINA:
I have a Chinese made integrated amp (Kinki Studio). It is no slouch, having been awarded the Blue Moon award by none other than Srajen of 6moons. I blew the amp some time ago by an incorrect connection. It was my fault. But within minutes of sending an email, the dealer in Singapore was on whatsapp chatting with me, asking for photographs, communicating with the manufacturer, suggesting diagnostic checks. Within 24 hours, they realized it could not be fixed via distance communication with a non-electronics-trained user like me. Within a week, a pair of new power amp boards arrived by DHL, shipped at the dealer's cost, with detailed instructions on how to replace the boards. The only cost I incurred was the cost of shipping the old boards back to them for diagnosis. So I guess Xi Jinping wins this round :)
Thanks for reading
- ...
- 47 posts total
- 47 posts total