All VPI belt drive TTs use an AC motor. The ADS can run on 230 volts DC but needs to be set to do that at the factory (though if you have one and you're electrically handy perhaps they can guide you through it). It puts out AC voltage, either 120 or 230V as set at factory.
So you would seem to have three choices. 1. Buy a 230V 50Hz motor from VPI and install it in your motor base, or 2. Buy an ADS configured to your needs, or 3. Find a used SDS which will work on either 120 or 230 V and put out the 120V 50Hz that you need.
So you would seem to have three choices. 1. Buy a 230V 50Hz motor from VPI and install it in your motor base, or 2. Buy an ADS configured to your needs, or 3. Find a used SDS which will work on either 120 or 230 V and put out the 120V 50Hz that you need.